Product description
The axial clearance of the crankshaft must be adjusted between 0.07 and 0.13 mm and the wear limit is 0.15 mm.
Axial play is measured with a dial gauge. If the axial play is not accurately adjusted, the motor can suffer severe and irreparable damage. Play is adjusted using adjusting rings or shims located behind the flywheel, by first adjusting the axial clearance and then mounting the crankshaft retaining ring.
It is important that three shims are always fitted. The shims are available in different thicknesses to allow precise adjustment. Never use old, worn bushings, bushings with burrs or bushings that are no longer flat. This will make it impossible to determine the correct fit.
The inner diameter of these rings is 53.6 mm. Measure this diameter with Type 1 and Type 3 motors before ordering to ensure that your motor is actually dated according to the specified year of manufacture. With Type 4 or WBX engines, you don't need to measure this, they have never been modified. The exact engine number in 1966, from which the 53.6 mm inner diameter rings are used, is listed below.
Engines type 1:
1200 cc D 0 076 332
1300 cc E 0 004 201
1300 cc F 0 741 385
E type 3 engines:
1500 cc K 0 040 817
1500 cc M 0 000 300
1600 cc T 0 210 167
1600 cc P 0 000 800
Note: Adjustment of the crankshaft axial clearance should only be carried out when the engine is overhauled. Overhaul here means that new crankshaft bearings are fitted and the crankcase is in good condition (as the vast majority of engines require overhaul, it is also necessary to have the crankcase drilled in line and the axial bearing seat (1st main bearing) machined). In the case of existing engines, which are not recently overhauled, the axial clearance is often greater than 0.13 mm, for example 0.30 mm. The additional play here is caused by the wear of the crankcase and the 1st main bearing on each other. This play cannot be eliminated by means of the adjusting rings. Attempting to do so may cause serious damage to the engine. If there is too much axial play, overhaul is the only solution.
Crankshaft end play shims 0.36 mm
3 items in stock
€5.88 (3 pieces)
Prices incl. VAT
- Order before 3PM (CET)? Shipped the same day!
- Do you have questions? We are reachable until 17h (CET).
- VW specialist since 1989
- 30 days return period
Type-1 engines 1966 and later
Type-3 engines 1966 and later
CT/CZ engines all
Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
Do you want to know where this part belongs? Consult the exploded view drawing.
View drawing| Manufacturer | Paruzzi BV |
|---|---|
| Manufacturer address | Kreeft 16, 4401NZ Yerseke, Nederland |
| Manufacturer contact | sales@paruzzi.com |
| Country of origin | mx |
Specifications
| Paruzzi number | 4576 |
|---|---|
| Original VW number | 113105289A |
| Brand | Paruzzi |
Share:
- Applicable on Type-1 engines: | 1200cc (except 25hp+30hp) | 1300, 1500 and 1600cc | Type-3 engines | CT/CZ engines | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 1638
112 items available
Prices incl. VAT
- Applicable on Type-1 engines: | 1200cc (except 25hp+30hp) | 1300,1500 and 1600cc | Type-3 engines | CT/CZ engines | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 1639
- Original VW number: 113105245F
240 items available
Prices incl. VAT
- Applicable on Type-1 engines: | 1200cc (except 25hp+30hp) | 1300,1500 and 1600cc | Type-3 engines | CT/CZ engines | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 1640
121 items available
Prices incl. VAT
- Applicable on Type-1 engines: | 1200cc (except 25hp+30hp) | 1300,1500 and 1600cc | Type-3 engines | CT/CZ engines | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 3639
- Original VW number: 113105245F
294 items available
Prices incl. VAT
- Applicable on Type-1 engines | Type-3 engines | Type-4 engines | CT/CZ engines | Waterboxer engines | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 1113
109 items available
Prices incl. VAT
- Applicable on Type-1 engines: | 1200cc 1980 (D 1 455 272) and later | 1500cc | 1600cc (Bus until 1975 VIN 216 2118 505) | Type-3 engines 8.1962 and later | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 1503
- Original VW number: 311105271, 311105273A
12 items available
Prices incl. VAT
- Applicable on Type 1 engines: | 1200cc from 1980 (D 1 455 272) onwards | 1500cc | 1600cc (T2 Bay up to 1975, VIN 216 2118 505) | Type 3 engines from 8.1962 onwards | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 1504
Out of stock
Prices incl. VAT
- Applicable on Type-1 engines (not 25hp+30hp) | Type-3 engines | CT/CZ engines | Note: | Fits only vehicles with a manual transmission | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 1530
9 items available
Prices incl. VAT
- Applicable on Type-1 engines (not 25hp+30hp) | Type-3 engines | CT/CZ engines | Note: | Fits only vehicles with a manual transmission | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 1532
26 items available
Prices incl. VAT
- Applicable on Type-1 engines except 25hp+30hp and cars with automatic transmission | Type-3 engines except cars with automatic transmission | CT/CZ engines | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 1535
- Original VW number: 111105305E
200 items available
Prices incl. VAT
- Applicable on Type-1 engines 1966 and later | Type-3 engines 1966 and later | CT/CZ engines | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 1637
- Original VW number: 311105295A
954 items available
Prices incl. VAT
- Applicable on Type-1 engine | Type-3 engine | CT/CZ engine | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 2097
- Original VW number: 111105297
199 items available
Prices incl. VAT
- Applicable on Flywheel: | Type 1 engines | Type 3 engines | CT/CZ engines | Fan nut: | Type 1 engines | Rear axle nut: | Beetle | Karmann Ghia | Type 3 | Kübel | Bus up to 7.1963 | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 4111
- Original VW number: VW163A
132 items available
Prices incl. VAT
- Applicable on Type 1 engines: | 1200cc from 1980 (D 1 455 272) onwards | 1500cc | 1600cc (T2 Bay up to 1975, VIN 216 2118 505) | Type 3 engines from 8.1962 onwards | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 4504
6 items available
Prices incl. VAT
- Applicable on Type-1 engines 1966 and later | Type-3 engines 1966 and later | CT/CZ engines all | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 1575
- Original VW number: 113105285A
Out of stock
Prices incl. VAT
- Applicable on Type-1 engines 1966 and later | Type-3 engines 1966 and later | CT/CZ engines all | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 1576
- Original VW number: 113105287A
13 items available
Prices incl. VAT
- Applicable on Type-1 engines 1966 and later | Type-3 engines 1966 and later | CT/CZ engines all | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 1589
- Original VW number: 113105281A
23 items available
Prices incl. VAT
- Applicable on Type-1 engines 1966 and later | Type-3 engines 1966 and later | CT/CZ engines all | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 1590
- Original VW number: 113105283A
40 items available
Prices incl. VAT
- Applicable on Type-1 engines 1966 and later | Type-3 engines 1966 and later | CT/CZ engines all | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 4577
- Original VW number: 113105291A
26 items available
Prices incl. VAT
- Applicable on Type-4 engines | Waterboxer engines | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 41589
- Original VW number: 021105291
4 items available
Prices incl. VAT
- Applicable on Type-4 engines | Waterboxer engines | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 41590
- Original VW number: 021105281
5 items available
Prices incl. VAT
- Applicable on Type-1 engines 1966 and later | Type-3 engines 1966 and later | CT/CZ engines all | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 591451-101
32 items available
Prices incl. VAT
- Applicable on Type-1 engines 1966 and later | Type-3 engines 1966 and later | CT/CZ engines all | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 591451-102
47 items available
Prices incl. VAT
- Applicable on Type-1 engines 1966 and later | Type-3 engines 1966 and later | CT/CZ engines all | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 591451-103
5 items available
Prices incl. VAT
- Applicable on Type-1 engines 1966 and later | Type-3 engines 1966 and later | CT/CZ engines all | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 591451-105
Out of stock
Prices incl. VAT