Product description
The axial clearance of the crankshaft must be adjusted between 0.07 and 0.13 mm and the wear limit is 0.15 mm.
Axial play is measured with a dial gauge. If the axial play is not accurately adjusted, the motor can suffer severe and irreparable damage. Play is adjusted using adjusting rings or shims located behind the flywheel, by first adjusting the axial clearance and then mounting the crankshaft retaining ring.
It is important that three shims are always fitted. The shims are available in different thicknesses to allow precise adjustment. Never use old, worn bushings, bushings with burrs or bushings that are no longer flat. This will make it impossible to determine the correct fit.
The inner diameter of these rings is 53.6 mm. Measure this diameter with Type 1 and Type 3 motors before ordering to ensure that your motor is actually dated according to the specified year of manufacture. With Type 4 or WBX engines, you don't need to measure this, they have never been modified. The exact engine number in 1966, from which the 53.6 mm inner diameter rings are used, is listed below.
Engines type 1:
1200 cc D 0 076 332
1300 cc E 0 004 201
1300 cc F 0 741 385
E type 3 engines:
1500 cc K 0 040 817
1500 cc M 0 000 300
1600 cc T 0 210 167
1600 cc P 0 000 800
Note: Adjustment of the crankshaft axial clearance should only be carried out when the engine is overhauled. Overhaul here means that new crankshaft bearings are fitted and the crankcase is in good condition (as the vast majority of engines require overhaul, it is also necessary to have the crankcase drilled in line and the axial bearing seat (1st main bearing) machined). In the case of existing engines, which are not recently overhauled, the axial clearance is often greater than 0.13 mm, for example 0.30 mm. The additional play here is caused by the wear of the crankcase and the 1st main bearing on each other. This play cannot be eliminated by means of the adjusting rings. Attempting to do so may cause serious damage to the engine. If there is too much axial play, overhaul is the only solution.
Crankshaft end play shims 0.38 mm
Out of stock
€7.15 (3 pieces)
Prices incl. VAT
- Order before 3PM (CET)? Shipped the same day!
- Do you have questions? We are reachable until 17h (CET).
- VW specialist since 1989
- 30 days return period
Type-1 engines 1966 and later
Type-3 engines 1966 and later
CT/CZ engines all
Specifications
| Paruzzi number | 4577 |
|---|---|
| Original VW number | 113105291A |
| Brand | Paruzzi |
Share:
- Applicable on Type-1 engines: | 1200cc (except 25hp+30hp) | 1300, 1500 and 1600cc | Type-3 engines | CT/CZ engines
- Paruzzi number: 1638
40 items available
Prices incl. VAT
- Applicable on Type-1 engines: | 1200cc (except 25hp+30hp) | 1300,1500 and 1600cc | Type-3 engines | CT/CZ engines
- Paruzzi number: 1639
- Original VW number: 113105245F
445 items available
Prices incl. VAT
- Applicable on Type-1 engines: | 1200cc (except 25hp+30hp) | 1300,1500 and 1600cc | Type-3 engines | CT/CZ engines
- Paruzzi number: 1640
142 items available
Prices incl. VAT
- Applicable on Type-1 engines: | 1200cc (except 25hp+30hp) | 1300,1500 and 1600cc | Type-3 engines | CT/CZ engines
- Paruzzi number: 3639
- Original VW number: 113105245F
385 items available
Prices incl. VAT
- Applicable on Type-1 engines | Type-3 engines | Type-4 engines | CT/CZ engines | Waterboxer engines
- Paruzzi number: 1113
Out of stock
Prices incl. VAT
- Applicable on Type-1 engines: | 1200cc 1980 (D 1 455 272) and later | 1500cc | 1600cc (Bus until 1975 VIN 216 2118 505) | Type-3 engines 8.1962 and later
- Paruzzi number: 1503
- Original VW number: 311105271 311105273A
71 items available
Prices incl. VAT
- Applicable on Type-1 engines: | 1200cc 1980 (D 1 455 272) and later | 1500cc | 1600cc (Bus until 1975 VIN 216 2118 505) | Type-3 engines 8.1962 and later
- Paruzzi number: 1504
16 items available
Prices incl. VAT
- Applicable on Type-1 engines (not 25hp+30hp) | Type-3 engines | CT/CZ engines | Note: | Fits only vehicles with a manual transmission
- Paruzzi number: 1530
25 items available
Prices incl. VAT
- Applicable on Type-1 engines (not 25hp+30hp) | Type-3 engines | CT/CZ engines | Note: | Fits only vehicles with a manual transmission
- Paruzzi number: 1532
26 items available
Prices incl. VAT
- Applicable on Type-1 engines except 25hp+30hp and cars with automatic transmission | Type-3 engines except cars with automatic transmission | CT/CZ engines
- Paruzzi number: 1535
- Original VW number: 111105305E
178 items available
Prices incl. VAT
- Applicable on Type-1 engines 1966 and later | Type-3 engines 1966 and later | CT/CZ engines
- Paruzzi number: 1637
- Original VW number: 311105295A
1267 items available
Prices incl. VAT
- Applicable on Type-1 engine | Type-3 engine | CT/CZ engine
- Paruzzi number: 2097
- Original VW number: 111105297
204 items available
Prices incl. VAT
- Applicable on Flywheel: | Type 1 engines | Type 3 engines | CT/CZ engines | Fan nut: | Type 1 engines | Rear axle nut: | Beetle | Karmann Ghia | Type 3 | Kübel | Bus up to 7.1963
- Paruzzi number: 4111
- Original VW number: VW163A
198 items available
Prices incl. VAT
- Applicable on Type-1 engines: | 1200cc 1980 (D 1 455 272) and later | 1500cc | 1600cc (Bus until 1975 VIN 296 2118 505) | Type-3 engines 8.1962 and later
- Paruzzi number: 4504
7 items available
Prices incl. VAT
- Applicable on Type-1 engines 1966 and later | Type-3 engines 1966 and later | CT/CZ engines all
- Paruzzi number: 1575
- Original VW number: 113105285A
Out of stock
Prices incl. VAT
- Applicable on Type-1 engines 1966 and later | Type-3 engines 1966 and later | CT/CZ engines all
- Paruzzi number: 1576
- Original VW number: 113105287A
Out of stock
Prices incl. VAT
- Applicable on Type-1 engines 1966 and later | Type-3 engines 1966 and later | CT/CZ engines all
- Paruzzi number: 1589
- Original VW number: 113105281AX3
72 items available
Prices incl. VAT
- Applicable on Type-1 engines 1966 and later | Type-3 engines 1966 and later | CT/CZ engines all
- Paruzzi number: 1590
- Original VW number: 113105283A
72 items available
Prices incl. VAT
- Applicable on Type-1 engines 1966 and later | Type-3 engines 1966 and later | CT/CZ engines all
- Paruzzi number: 4576
- Original VW number: 113105289A
16 items available
Prices incl. VAT
- Applicable on Type-4 engines | Waterboxer engines
- Paruzzi number: 41589
- Original VW number: 021105291
10 items available
Prices incl. VAT
- Applicable on Type-4 engines | Waterboxer engines
- Paruzzi number: 41590
- Original VW number: 021105281
10 items available
Prices incl. VAT