Product description
The usefulness of flywheel dowel pins is often underestimated, they are put back in place without paying attention, with all its consequences. Play at the dowel pins occurs more often than you might think and can only happen in one way: the flywheel is not tightened with the correct clamping force, causing it to loosen and the holes to burst.
Always check the condition of the holes and the flatness of the mounting surfaces (on the crankshaft and flywheel) and never put the dowel pins back into the damaged holes. If the holes are slightly bored, you can repair them by using oversized dowel pins, these oversized pins are also longer.
For engines with higher power, it is advisable to equip the crankshaft with 8 pins, all crankshafts with counterweights are already equipped with them, as well as the lighter flywheels. The dowel pins are available in three versions, in a standard size, an extra long size and an oversized size, the latter also being longer.
The standard size replaces the original pins, the extra long pins are for a better fastening and are recommended for crankshafts with 8 pins or to improve the original 4 pins. The oversized ones are for repairing slightly damaged holes and are recommended to mount the flywheel and crankshaft directly with 8 pins.
To drill four additional holes, you need the right tool, the drilling jig (if necessary mentioned in the options tab) is indispensable, it allows you to drill symmetrical and asymmetrical holes.
Attention: If the overhaul was carried out by Volkswagen at the time, the crankshaft and steering wheel were machined, so shorter dowel pins had to be fitted, 12.5 mm instead of the usual 14 mm. You may have such an engine, in which case always measure the length before mounting and, if necessary, shorten the pins or drill the holes a little deeper.
Longer flywheel dowel pins
6 items in stock
€34.65 (8 pieces)
Prices incl. VAT
- Order before 3PM (CET)? Shipped the same day!
- Any questions? We're reachable until 17h (CET).
- VW specialist since 1989
- 30 days return period
Type-1 engines (except 25hp+30hp)
Type-3 engines
CT/CZ engines
Specifications
| Paruzzi number | 1648 |
|---|---|
| Brand | EMPI EU |
| Diameter | 8 mm |
| Freight | No |
| Length | 19 mm |
Share:
Complete your order:
- Applicable on Type-1 engines | Type-3 engines | Type-4 engines | CT/CZ engines | Waterboxer engines
- Paruzzi number: 1113
11 items available
incl. vat
- Applicable on Type-1 engines: | 1200cc 1980 (D 1 455 272) and later | 1500cc | 1600cc (Bus until 1975 VIN 216 2118 505) | Type-3 engines 8.1962 and later
- Paruzzi number: 1503
- Original VW number: 311105271 311105273A
85 items available
incl. vat
- Applicable on Type-1 engines: | 1200cc 1980 (D 1 455 272) and later | 1500cc | 1600cc (Bus until 1975 VIN 216 2118 505) | Type-3 engines 8.1962 and later
- Paruzzi number: 1504
25 items available
incl. vat
- Applicable on Type-1 engines (not 25hp+30hp) | Type-3 engines | CT/CZ engines | Note: | Fits only vehicles with a manual transmission
- Paruzzi number: 1530
20 items available
incl. vat
- Applicable on Type-1 engines (not 25hp+30hp) | Type-3 engines | CT/CZ engines | Note: | Fits only vehicles with a manual transmission
- Paruzzi number: 1532
26 items available
incl. vat
- Applicable on Type-1 engines except 25hp+30hp and cars with automatic transmission | Type-3 engines except cars with automatic transmission | CT/CZ engines
- Paruzzi number: 1535
- Original VW number: 111105305E
211 items available
incl. vat
- Applicable on Type-1 engines | Type-3 engines | Type-4 engines | CT/CZ engines | Waterboxer engines
- Paruzzi number: 1558
- Original VW number: 111105213
Out of stock
incl. vat
- Applicable on Type-1 engines | Type-3 engines | Type-4 engines | CT/CZ engines | Waterboxer engines
- Paruzzi number: 1642
- Original VW number: 111105223
43 items available
incl. vat
- Applicable on Type-1 engines except 25hp+30hp | Type-3 engines | CT/CZ engines | Waterboxer engines
- Paruzzi number: 1646
- Original VW number: 113105209
3 items available
incl. vat
- Applicable on Type-1 engines (except 25hp+30hp engines) | Type-3 engines | Type-4 engines | CT/CZ engines | Waterboxer engines
- Paruzzi number: 1647
10 items available
incl. vat
- Applicable on Type-1, Type-3, CT/CZ engine flywheel | Beetle, Karmann Ghia, Type 3, Thing all and Bus until 7.1963 axle nut
- Paruzzi number: 4111
- Original VW number: VW163A
Out of stock
incl. vat
- Applicable on Type-1 engines: | 1200cc 1980 (D 1 455 272) and later | 1500cc | 1600cc (Bus until 1975 VIN 296 2118 505) | Type-3 engines 8.1962 and later
- Paruzzi number: 4504
1 item available
incl. vat
- Applicable on all aircooled engines
- Paruzzi number: 4642
- Original VW number: 111105227
353 items available
incl. vat
- Applicable on Type-1 engine (inside flywheel bolt) | Type-3 engine (inside flywheel bolt) | Type-4 engine (inside crankshaft) | CT/CZ engine (inside flywheel bolt) | Waterboxer engines (inside crankshaft)
- Paruzzi number: 41535
- Original VW number: 111105313A
31 items available
incl. vat