Product description
This electric fuel pump is usually required when several carburetors are mounted in tuned engines, the fuel pump has a higher flow rate than the mechanical pump and does not depend on the engine speed.
The fuel pump rotates freely when the carburetor is sufficiently filled, so a return hose is not necessary.
The hole of the original mechanical pump in the motor crankcase must be sealed with a cover plate (see Options tab).
This rotary electric fuel pump comes with a mounting bracket and two clamps.
As this fuel pump does not suck but presses, it is advisable to place the pump lower than the fuel tank.
This petrol pump is only suitable for 12 volt carburetor engines, has 8 mm petrol hose connections and has a flow rate of 90 liters per hour at a pressure of 0.27 to 0.38 bar.
It is strongly recommended to install the Safety Relay (see Options tab) so that the fuel pump stops as soon as the engine stops.
This is a high quality pump, if you are looking for a cheaper alternative, you can also choose the quality B version (see alternatives tab).
Note: Many mount an electric fuel pump in the engine compartment and often mounted to the engine, a logical choice but not the most secure place. It is better to keep it out of the engine compartment and to house it elsewhere. The mounting will then take place on the chassis or the body with the disadvantage that vibrations are passed on, this will be felt and heard in the cabin. By mounting the fuel pump with vibration dampers, you get rid of these for good. It is therefore advisable to order these directly, they are listed on the tab "options".
Note: For the life and reliability of the fuel pump, it is important to install a fuel filter in front of the pump. Warranty is excluded if it is found that the pump has seized due to contamination.
1 items in stock
€53.06 (Each)
Prices incl. VAT
- Order before 3PM (CET)? Shipped the same day!
- Do you have questions? We are reachable until 17h (CET).
- VW specialist since 1989
- 30 days return period
Weber and HPMX carburetors
| Manufacturer | Paruzzi BV |
|---|---|
| Manufacturer address | Kreeft 16,4401NZ Yerseke, Nederland |
| Manufacturer contact | sales@paruzzi.com |
| Country of origin | si |
Specifications
| Paruzzi number | 3686-101 |
|---|---|
| Brand | PN |
| Capacity | 100 l/h |
| Max pressure | 0,2 Bar |
| Quality | A |
| Voltage | 12V |
Options
- Paruzzi number: 1155-101
100 items available
Prices incl. VAT
- Applicable on Type-1 (except 25hp+30hp) engines | Type-3 engines | CT/CZ engines | Waterboxer engines
- Paruzzi number: 1691
28 items available
Prices incl. VAT
- Applicable on Type-1 (except 25hp+30hp engines) | Type-3 | CT/CZ | Waterboxer engines
- Paruzzi number: 3691
11 items available
Prices incl. VAT
- Applicable on Fuel pump #1686 and #3686
- Paruzzi number: 3696
24 items available
Prices incl. VAT
- Applicable on Beetle 8.1961 and later (except 1302 and 1303) | Karmann Ghia 8.1961 and later | Bus 8.1961 until 1975 (VIN 215 2147 352) | Type 3 | Thing
- Paruzzi number: 4482
100 items available
Prices incl. VAT
- Applicable on Type-1 (except 25hp+30hp engines) | Type-3 | CT/CZ | Waterboxer engines
- Paruzzi number: 4691
6 items available
Prices incl. VAT
- Applicable on Type-4 engines
- Paruzzi number: 43691
14 items available
Prices incl. VAT
Alternatives
- Paruzzi number: 3686
69 items available
Prices incl. VAT
Replacement Parts
- Paruzzi number: 7410
- Original VW number: N120081, N120082, N0120387, N0120086, N0120388
108 items available
Prices incl. VAT
- Paruzzi number: 7417
- Original VW number: N01100830, N01100818, N110088, N0110088, N110083, N110085
35 items available
Prices incl. VAT
- Paruzzi number: 8105
- Original VW number: 111971950
137 items available
Prices incl. VAT
- Paruzzi number: 8122
- Original VW number: 111971960, N0174918
61 items available
Prices incl. VAT
- Applicable on Karmann Ghia | Vanagon/T25
- Paruzzi number: 73838
- Original VW number: 111971921B
168 items available
Prices incl. VAT
Other models
- Applicable on Type-1 engines until 7.1965 (except 25hp+30hp)
- Paruzzi number: 1502
- Original VW number: 211127025, 113127025
62 items available
Prices incl. VAT
- Applicable on Type-1 engine 8.1965 until 7.1973 | Type-3 engines
- Paruzzi number: 1541
- Original VW number: 113127025DR
372 items available
Prices incl. VAT
- Applicable on Type-1 engines 8.1973 and later
- Paruzzi number: 1542
- Original VW number: 113127025G
460 items available
Prices incl. VAT
- Applicable on Type-1 engine 8.1965 until 7.1973 | Type-3 engines
- Paruzzi number: 1685
6 items available
Prices incl. VAT
- Applicable on Type-1 engines until 1.1980 | Type-4 engines | Waterboxer engines
- Paruzzi number: 2171
- Original VW number: 251906091, 043906091
92 items available
Prices incl. VAT
- Paruzzi number: 3686
69 items available
Prices incl. VAT
- Applicable on Type-1 engines 25hp+30hp
- Paruzzi number: 4540
- Original VW number: 111127025, 111127025A, 111127025B
17 items available
Prices incl. VAT
- Applicable on Type 1 engines from 8.1965 and later | Type 3 engines | Note: The push rod must be 100 mm long, regardless of the engine’s production year.
- Paruzzi number: 4541
- Original VW number: 113127025G
233 items available
Prices incl. VAT
- Applicable on Type-1 engines 10.1992 and later (engine code ACD)
- Paruzzi number: 5171
- Original VW number: 043919051, BAA919051C
Out of stock
Prices incl. VAT
- Applicable on Type-4 engines
- Paruzzi number: 41542
- Original VW number: 021127025A
60 items available
Prices incl. VAT
- Applicable on CT/CZ engines | Waterboxer engines
- Paruzzi number: 71542
- Original VW number: 025127025A
53 items available
Prices incl. VAT