VW-spesialist siden 1989 Bestilt før kl. 15.00? Sendt samme dag!
Om oss Ledige stillinger Kontakt B2B
FI
Gå til forsiden
0,00 €

Tekniske videoer

Vår videobibliotek er her for å hjelpe deg med å vedlikeholde og bedre forstå din Volkswagen Type 1 luftkjølt motor. Enten du diagnostiserer et problem, planlegger en fullstendig ombygging eller bare finjusterer timingen, vil disse videoene veilede deg gjennom prosessen trinn for trinn. 
Hver veiledning er laget av våre interne eksperter med flere tiårs erfaring med VW. De er klare, konsise og filmet rundt virkelige oppgaver som klassiske VW-eiere står overfor hver dag. 

Søk og se 

Bruk søkefunksjonen nedenfor for å finne videoer etter nøkkelord – basert på del, system eller emne. Du kan også bla gjennom alle tidligere publiserte videoer eller sortere etter tema. 
Leter du etter mer inngående lesestoff? Besøk vår tekniske magasindivisjon for detaljerte artikler som utfyller det du ser her.
Engine adjustment - video 01 - valve clearance

The valve clearance is the first thing to check when adjusting an engine. If the valve clearance is not adjusted properly, then adjusting for example, the ignition, or the carburetor, will do little good. In this video we will show you how to adjust the valve clearance.

Watch

Engine adjustment - video 02 - adjusting the rocker arms

In the first video of this series, we adjusted the valve clearance. In addition to the valve clearance, the position of the rocker arm relative to the valve stem, is also a very important setting. If a rocker arm is not positioned correctly, it can be adjusted, which is called shimming.

Watch

Engine diagnostics - video 01 - crankshaft end play

In the first video of this new series, we will look at how to measure the crankshaft end play. Measuring the crankshaft end play, will help you estimate if your engine needs a total overhaul. If the result of the measurement is greater than or equal to 0.15 millimeters, then the crankshaft clearance is too large, and a total engine overhaul is recommended.

Watch

Engine diagnostics - video 02 - rockers and rocker arm

In video fourteen of our engine overhaul video series, we disassembled and reassembled the rocker arms and rocker shaft. We will diagnose the rocker arms and rocker shaft in this video. Additional attention will be paid to the adjusting screws and adjusting nuts.

Watch

Engine diagnostics - video 02 BONUS - defective rockers arm parts

In video two of this series, we measured the rocker arm parts, and compared them to the wear limits listed by the VW workshop manual. In this video, we will show examples of rocker arm parts that are in less good condition than these of our AB 1300 engine from video two. This should help, to better diagnose the rocker arm parts.

Watch

Engine diagnostics - video 03 - pushrods

In video fourteen of our series on engine overhaul, we disassembled and reassembled the rocker arms and pushrods. In this video, we will inspect the pushrods. The result of this diagnosis, will tell us if we can reinsert the pushrods, or if we need to replace them.

Watch

Nye videoer legges til regelmessig. Abonner på nyhetsbrevet for å holde deg oppdatert.