Product description
Until 7/1969, the oil channels on Type 1 and Type 3 engines were 8 mm in diameter, then 10 mm and 12 mm, so they're often referred to as small or large oil channels. If the oil cooler needs replacing, they're only available new with large oil channels #01906, so in theory you couldn't install a new oil cooler on an engine with small oil channels. Volkswagen spotted this problem early on and came up with this oil cooler reducer joint which allows you to fit an oil cooler with large oil channels to an engine intended for small oil channels without any problems.
With these adapting seals, it is also possible to fit a small oil cooler on a large-channel engine, but this is not recommended, as it would restrict the oil flow of an engine with a better basic flow.
Type 1 engine
Up to 1969, oil coolers were flat on the underside and located on the crankcase with no space between them. After 1969, there is a certain amount of space between the radiator and the crankcase. Mounting an old radiator on a new crankcase without rings means you're pushing the seals too far and obstructing the passage.
Type 3 engine
When using radiators with large oil channels and mixed crankcases on Type 3 engines, you must use the reduction gaskets, but in both cases without the rings.
Oil cooler adapting seal (from 8 to 10 mm) kit
209 items in stock
€2.04 (Per set)
Prices incl. VAT
- Order before 3PM (CET)? Shipped the same day!
- Do you have questions? We are reachable until 17h (CET).
- VW specialist since 1989
- 30 days return period
Type-1 engines until 7.1969
Type-3 engines 8.1962 until 7.1969
| Manufacturer | Paruzzi BV |
|---|---|
| Manufacturer address | Kreeft 16, 4401NZ Yerseke, Nederland |
| Manufacturer contact | sales@paruzzi.com |
| Country of origin | br |
Specifications
| Paruzzi number | 3725 |
|---|---|
| Original VW number | 111198029 |
| Brand | Paruzzi |
Share:
- Applicable on Type-1 engines until 7.1969
- Paruzzi number: 1905
- Original VW number: 111117021C 111117021D
211 items available
Prices incl. VAT
- Applicable on Type-1 engines until 7.1969 | Type-3 engines until 7.1962
- Paruzzi number: 3724
- Original VW number: 111117151
20 items available
Prices incl. VAT
- Applicable on Type-1 engines: | 1200cc 8.1969 and later | 1300, 1500 and 1600cc 8.1969 until 7.1970
- Paruzzi number: 1906
- Original VW number: 111117021E
120 items available
Prices incl. VAT
- Applicable on Type-1 8.1969 and later | Type-3 8.1969 and later | Type-4 | CT/CZ (oil cooler to intermediate flange)
- Paruzzi number: 1824
- Original VW number: 021117151A
296 items available
Prices incl. VAT
- Applicable on Type-1 engines until 7.1969 | Type-3 engines until 7.1962
- Paruzzi number: 3724
- Original VW number: 111117151
20 items available
Prices incl. VAT
- Applicable on replacement for #1820 and #1993 | option for the #1821
- Paruzzi number: 4824
27 items available
Prices incl. VAT
- Applicable on Type-3 engines 8.1962 until 7.1969
- Paruzzi number: 31824
- Original VW number: 311117151A
23 items available
Prices incl. VAT
- Applicable on CT/CZ engines
- Paruzzi number: 74824
- Original VW number: 070117289
9 items available
Prices incl. VAT