Product description
The anti-roll bar reduces body roll in corners and provides more direct and stable handling. A thicker and stiffer anti-roll bar reduces body movement and improves steering response, but the balance between the front and rear of the car must be maintained.
This heavy-duty front anti-roll bar has a larger diameter than the standard version and provides a clear improvement in handling.
The mounting clamps and rubbers are not included with every version. For torsion bar suspension models, with the exception of the T2 Bay, we recommend using the clamps specially designed for this purpose. The original clamps can often be reused, but installation can be quite difficult due to the stiffer urethane rubbers. If the required clamps and urethane rubbers are not included, they are listed under the Options tab.
On the 1302 and 1303 Beetle and the T2 Bay, the existing mounting clamps can be reused. If they are rusty, distorted or worn, we recommend replacing them.
For cars with IRS rear suspension, we recommend fitting a suitable rear anti-roll bar in addition to a thicker front anti-roll bar. Increasing only the roll stiffness at the front changes the balance of the car and can cause more understeer. A properly matched front and rear anti-roll bar provides more balanced handling.
On models with swing axles, a rear anti-roll bar is not essential when fitting a heavy-duty front anti-roll bar, but it can further improve handling. Where applicable, the available versions are listed under the Options tab.
For torsion bar suspension models, the front anti-roll bars are available, depending on the model, in standard, lowered and narrowed versions. Always choose the version that matches the front axle and ride height of your car. Do not simply use a standard anti-roll bar on a lowered torsion bar front axle, as it may sit too close to the road and hit obstacles.
This does not apply in the same way to the 1302 and 1303 Beetle because of their different front suspension. Always choose the anti-roll bar specifically intended for the model and ride height. For the T2 Bay, you should also check whether the anti-roll bar is suitable for the front axle and ride height being used.
Heavy-duty front anti-roll bar for standard front axle
84 items in stock
€119.60 (Each)
Prices incl. VAT
- Order before 3PM (CET)? Shipped the same day!
- Do you have questions? We are reachable until 17h (CET).
- VW specialist since 1989
- 30 days return period
Beetle from 8.1965 and later (except 1302 and 1303)
Karmann Ghia from 8.1965 and later
Trekker
Note:
Also use urethane rubbers 3363
| Manufacturer | Paruzzi BV |
|---|---|
| Manufacturer address | Kreeft 16, 4401NZ Yerseke, Nederland |
| Manufacturer contact | sales@paruzzi.com |
| Country of origin | CN |
Specifications
| Paruzzi number | 1391 |
|---|---|
| Brand | Uber |
| Diameter | 19 mm |
Share:
- Applicable on Beetle | Karmann Ghia | Thing | + heavy duty sway bars #1390, #1391, #1394, #1395
- Paruzzi number: 1299
2 items available
Prices incl. VAT
- Applicable on Beetle with swing axle 8.1960 and later | Karmann Ghia with swing axle 8.1960 and later | Bus 6.1959 until 7.1967 | Thing with swing axle | Note: | Does not go together with an original mounted compensating spring rod, remove it!
- Paruzzi number: 1392
3 items available
Prices incl. VAT
- Applicable on replacement bushings for the heavy duty sway bars: | #1390, #1391, #1394, #1395, #3393 and #3394
- Paruzzi number: 3363
7 items available
Prices incl. VAT
- Applicable on Beetle/Karmann Ghia 1200/1300/1500 8.1965 and later | Thing | + sway bars #1391/# 1395
- Paruzzi number: 3450
4 items available
Prices incl. VAT
- Applicable on Beetle VW 1200, VW 1300 en VW 1500 8.1965 and later LHD | Karmann Ghia 8.1965 and later LHD
- Paruzzi number: 6396
- Original VW number: 113401021D
27 items available
Prices incl. VAT
- Applicable on Beetle 1302 and 1303 up to 7.1973
- Paruzzi number: 1387
3 items available
Prices incl. VAT
- Applicable on Beetle 1303 from 8.1973 and later
- Paruzzi number: 1388
1 item available
Prices incl. VAT
- Applicable on Beetle up to 7.1965 | Karmann Ghia up to 7.1965
- Paruzzi number: 1390
1 item available
Prices incl. VAT
- Applicable on Beetle with swing axle 8.1960 and later | Karmann Ghia with swing axle 8.1960 and later | Bus 6.1959 until 7.1967 | Thing with swing axle | Note: | Does not go together with an original mounted compensating spring rod, remove it!
- Paruzzi number: 1392
3 items available
Prices incl. VAT
- Applicable on Beetle IRS | Karmann Ghia IRS | Thing IRS
- Paruzzi number: 1393
- Original VW number: AC5019597
3 items available
Prices incl. VAT
- Applicable on Beetle up to 7.1965 | Karmann Ghia up to 7.1965
- Paruzzi number: 1394
2 items available
Prices incl. VAT
- Applicable on Beetle from 8.1965 and later (except 1302 and 1303) | Karmann Ghia from 8.1965 and later | Trekker
- Paruzzi number: 1395
3 items available
Prices incl. VAT
- Applicable on Beetle from 8.1965 and later (except 1302 and 1303) | Karmann Ghia from 8.1965 and later | Trekker
- Paruzzi number: 3393
4 items available
Prices incl. VAT
- Applicable on Beetle up to 7.1965 | Karmann Ghia up to 7.1965
- Paruzzi number: 3394
3 items available
Prices incl. VAT
- Applicable on T2 Bay
- Paruzzi number: 21395
5 items available
Prices incl. VAT
- Applicable on Bus 8.1967 until 7.1979
- Paruzzi number: 21396
Out of stock
Prices incl. VAT