Product description
Replacing the generator pulley will be necessary in most cases when you have bent the old one during disassembly, or when the pulley nut has not been tightened properly (60 Nm.), causing play and breaking of the two halves.
But for most of us, aesthetics will be the most important argument, a rusty dynamo pulley is not a good business card.
Before ordering a pulley, take a look at your generator or alternator and measure the diameter if necessary, it's an important data for the good choice of the pulley.
Between the pulley halves there are adjustment rings. By removing or adding adjusting rings, the V-belt can be put under tension. If you can press the V-belt about 1.5 cm with your thumb, the tension is correct.
Also check the options tab and order a set of adjusting rings and possibly a new key. The key is located in the shaft of the dynamo and secures the pulley on the shaft.
Available in black, galvanized or chrome, depending on the model. The black version has a very high quality powder coating. It is advisable to remove the powder coating on the inside where the dynamo shaft slides, so that the mounting on the dynamo shaft is smooth. This is not necessary for the chrome and galvanized version.
Alternator/generator pulley chrome
24 items in stock
€17.30 (Each)
Prices incl. VAT
- Order before 3PM (CET)? Shipped the same day!
- Do you have questions? We are reachable until 17h (CET).
- VW specialist since 1989
- 30 days return period
Type-1 engines until 1993 (VIN 11-R-068 481)
Note:
only with a 6 or 12V 105 mm generator or alternator
Do you want to know where this part belongs? Consult the exploded view drawing.
View drawingSpecifications
| Paruzzi number | 1920 |
|---|---|
| Brand | Paruzzi |
Share:
- Applicable on Type-1 engines | Type-3 engines
- Paruzzi number: 1559
- Original VW number: N0127051 N127051
59 items available
Prices incl. VAT
- Paruzzi number: 1936
- Original VW number: 111903131A 111119133B
18 items available
Prices incl. VAT
- Applicable on Type-1 engines
- Paruzzi number: 4934
361 items available
Prices incl. VAT
- Applicable on Type-1 engines with alternator or ø 105 mm generator
- Paruzzi number: 1948
5 items available
Prices incl. VAT
- Applicable on Type-1 engines until 1993 (VIN 11-R-068 481) | Note: | only with a 6 or 12V 105 mm generator or alternator
- Paruzzi number: 2093
- Original VW number: 131903109 043903109
363 items available
Prices incl. VAT
- Applicable on Type-1 engines except 25hp+30hp
- Paruzzi number: 1900
1 item available
Prices incl. VAT
- Applicable on Type-1 engines except 25hp+30hp
- Paruzzi number: 1904
23 items available
Prices incl. VAT
- Applicable on Type-1 engines 1500 and 1600cc
- Paruzzi number: 1908
- Original VW number: 113105251G
69 items available
Prices incl. VAT
- Applicable on Type-1 engines except 25hp+30hp
- Paruzzi number: 1910
34 items available
Prices incl. VAT
- Applicable on Type-1 engines except 25hp+30hp
- Paruzzi number: 1911
28 items available
Prices incl. VAT
- Applicable on Type-1 engines except 25hp+30hp
- Paruzzi number: 1912
14 items available
Prices incl. VAT
- Applicable on Type-1 engines with 170 mm pulley (except 25hp)
- Paruzzi number: 1941
- Original VW number: 111903137D
24 items available
Prices incl. VAT
- Applicable on Type-1 engines with 146 mm power pulley
- Paruzzi number: 1942
- Original VW number: 055903137G
15 items available
Prices incl. VAT
- Applicable on Type-1 engines with 177 mm pulley
- Paruzzi number: 1943
- Original VW number: 111903137E
33 items available
Prices incl. VAT
- Applicable on 8.1960 and later (except 30hp engines)
- Paruzzi number: 1945
21 items available
Prices incl. VAT
- Applicable on 8.1960 and later (except 30hp engines)
- Paruzzi number: 1946
44 items available
Prices incl. VAT
- Applicable on Type-1 engines with 170 mm pulley (except 25hp)
- Paruzzi number: 3941
- Original VW number: 111903137D
180 items available
Prices incl. VAT