Product description
When replacing a brake cylinder, a set of brake shoes, or performing regular maintenance, most VW models require unscrewing the rear axle nut to remove the brake drum. First remove the cotter pin, lock the rear wheel and loosen the rear axle nut.
If the rear axle nut is damaged when unscrewed, do not replace it, but replace it. Even if a previous owner damaged the nut, it is best to replace it. If the nut is tight, keep turning until the hole for a notch falls into the nut and always secure it with a new cotter pin (see options tab).
The wrench size is listed as an extra, so you can check to see if you have the right wrench. Do not try to loosen the nut with a hammer and screwdriver, but make sure you have the right tool. To lock the rear axle, use a locking bar attached to the wheel hub drum or flange with the wheel bolts or nuts. To loosen the nut, use a rear axle wrench or socket wrench.
Don't forget to order a set of cotter pins, which you will need to secure the nut after tightening it to the proper torque. A pin cannot be used a second time, so always order an extra one, it is listed in the options tab.
Rear axle castle nuts M24
85 items in stock
€5.00 (Per pair)
Prices incl. VAT
- Order before 3PM (CET)? Shipped the same day!
- Do you have questions? We are reachable until 17h (CET).
- VW specialist since 1989
- 30 days return period
Beetle until 7.1966
Karmann Ghia until 7.1966
Bus until 7.1963 (except models with a 1500cc engine)
Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
Do you want to know where this part belongs? Consult the exploded view drawing.
View drawing| Manufacturer | Paruzzi BV |
|---|---|
| Manufacturer address | Kreeft 16, 4401NZ Yerseke, Nederland |
| Manufacturer contact | sales@paruzzi.com |
| Country of origin | CN |
Specifications
| Paruzzi number | 4449 |
|---|---|
| Original VW number | 111501221 |
| Brand | Paruzzi |
| Thread size | M24 X 1.5 |
| Wrench size | 36 mm |
Share:
- Applicable on Beetle | Karmann Ghia | Bus until 7.1963 | Type 3 | Thing | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 1119
6 items available
Prices incl. VAT
- Paruzzi number: 1124
82 items available
Prices incl. VAT
- Applicable on Beetle | Karmann Ghia | Bus until 7.1963 | Type 3 | Thing | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 1411
- Original VW number: N125451, N0125451
448 items available
Prices incl. VAT
- Applicable on Flywheel: | Type 1 engines | Type 3 engines | CT/CZ engines | Fan nut: | Type 1 engines | Rear axle nut: | Beetle | Karmann Ghia | Type 3 | Kübel | Bus up to 7.1963 | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 4111
- Original VW number: VW163A
132 items available
Prices incl. VAT
- Applicable on Beetle 10.1957 until 7.1967 * | Karmann Ghia 10.1957 until 7.1967 *
- Paruzzi number: 1285
- Original VW number: 113501615D
20 items available
Prices incl. VAT
- Applicable on Bus 3.1955 until 7.1963 | Thing with swing axle | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 21285
- Original VW number: 211501615A
2 items available
Prices incl. VAT
- Applicable on Beetle from 8.1966 and later | Karmann Ghia from 8.1966 and later | T2 Split through 7.1963 (only models with a 1500 cc engine) | Type 3 | Trekker | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 1449
- Original VW number: 311501221
66 items available
Prices incl. VAT
- Applicable on Bus 8.1963 and later | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 21448
- Original VW number: 211501221A, N90149601
Out of stock
Prices incl. VAT