Product description
The cooling air deflection plates that are clamped between the cylinders and the small plates between the cooling fins of the cylinder head have an important function, just like all other sheet metal parts connected to the cooling air, they ensure maximum use of the cooling air.
After being blown through the cylinders, the air is reflected so that it is not lost immediately. The result is a reduction in cylinder head and cylinder temperature. Many forget to install them, especially the metal sheets that are mounted between the cooling fins of the cylinder head. Plates cannot be retrofitted when the push rod tubes are already installed, they must be fitted beforehand.
The plates that are clamped into the cylinder head have a recess for the cooling thermostat rod and are made universal by Volkswagen for the left and right cylinder heads. During a cylinder head overhaul, these plates do not survive most of the time and replacement is the only good solution, even if new cylinder heads are never fitted as standard when purchased.
Cooling air sheets between the cylinders are available in two versions for use with 8 or 10 mm threaded rods (these are used to mount the cylinder heads and cylinders), always check before ordering.
Cylinder cooling air plates for newer type 3 and CT/CZ engines provide better cooling, they can also be mounted on a type 1 engine.
Deflector plates
11 items in stock
€7.70 (Per pair)
Prices incl. VAT
- Order before 3PM (CET)? Shipped the same day!
- Any questions? We're reachable until 17h (CET).
- VW specialist since 1989
- 30 days return period
Type-1 1200 engines (except 25hp and 30 hp)
Note:
Raw steel
Do you want to know where this part belongs? Consult the exploded view drawing.
View drawingSpecifications
| Paruzzi number | 2240 |
|---|---|
| Original VW number | 113119317 |
| Brand | Volkswagen germany |
| Freight | No |
Share:
Complete your order:
- Applicable on Type-1 engines except 25hp+30hp | Type-3 engines | CT/CZ engines for the cylinder head side | Waterboxer engines for the cylinder head side
- Paruzzi number: 1751
25 items available
incl. vat
- Applicable on Type-1 engines 1200cc (except 25hp+30hp)
- Paruzzi number: 1759
- Original VW number: 113109335
123 items available
incl. vat
- Applicable on Type-1 engines 1200cc (except 25hp+30hp) | Type-1 engines 1300-1500-1600cc | Type-3 engines
- Paruzzi number: 1761
299 items available
incl. vat
- Applicable on Type-1 engines (except 25hp+30hp engines) | Type-3 engines until 7.1970
- Paruzzi number: 1762
47 items available
incl. vat
- Applicable on Type-1 engines 1200cc (except 25hp+30hp) | Type-1 engines 1300-1500-1600cc | Type-3 engines | CT/CZ engines for the cylinder head side | Waterboxer engines for the cylinder head side
- Paruzzi number: 1763
- Original VW number: 113109345A
900 items available
incl. vat
- Applicable on Type-1 engines 1200cc (except 25hp and 30hp)
- Paruzzi number: 1766
- Original VW number: 113109335
71 items available
incl. vat
- Applicable on Type-1 engines: | 1200cc until 7.1969 | 1300cc until 7.1969 | 1500cc until 7.1967 | Note: | Also use rear panel # 2222, # 2223, # 2224 or # 2225 to fit on later 1300, 1500 or 1600cc engines with a single hotspot
- Paruzzi number: 2235
- Original VW number: 113119533G
50 items available
incl. vat