Product description
The most ideal shock absorber for Buggies, Baja's and vehicles equipped with a tow bar that regularly carry a heavy load.
Around the shock absorber is a spring that is adjustable in strength (5 positions). This adjusts not only the spring strength, but also the height. The lowest position of the spring is still higher than a standard shock absorber, so it is mounted with preload. Mount the upper side first, then place a jack under the shock absorber and jack it up until you can mount the lower side.
Note: Eye-mounted shock absorbers have a metal bushing pressed into the rubber. When disassembling the old shock absorbers, they sometimes want to stick to the support arm or mounting bolt (rusted) so the new shock absorber does not seem to fit. Remove this bushing before mounting the new one (if necessary, carefully grind it in with a grinder and then tap it loose).
Note for shock absorber #1375: On cars with a swing axle or if this shock absorber is mounted at the front, it is necessary to saw off the protruding bushing at the bottom of the shock absorber
Note for shock absorber #1376:Replace the nut at the top with a lock nut (tab 'Options') and do not tighten it too much, this to prevent the rubbers from being under too much tension and thus tearing.
Coil-over shock absorbers
156 items in stock
€103.75 (Per pair)
Prices incl. VAT
- Order before 3PM (CET)? Shipped the same day!
- Do you have questions? We are reachable until 17h (CET).
- VW specialist since 1989
- 30 days return period
Beetle:
10.1952 until 7.1965 front
10.1952 and later rear
Karmann Ghia:
until 7.1965 front
all years rear
Bus:
until 7.1967 rear
until 7.1979 front
Type 3:
all years front and rear
Note:
need modification for front side and swing axle
| Manufacturer | Paruzzi BV |
|---|---|
| Manufacturer address | Kreeft 16, 4401NZ Yerseke, Nederland |
| Manufacturer contact | sales@paruzzi.com |
| Country of origin | tw |
Specifications
| Paruzzi number | 1375 |
|---|---|
| Brand | Paruzzi |
Share:
- Applicable on Beetle 1957 (VIN 1-117 054) until 7.1962 | Karmann Ghia 1957 (VIN 1-117 054) until 7.1962 | Bus until 7.1962 | Type 3 until 1962 (VIN 64 915)
- Paruzzi number: 5306
- Original VW number: 111413401A
5 items available
Prices incl. VAT
- Paruzzi number: 7395
- Original VW number: N10105507 N110202 N0110204 N11112 N0110207
282 items available
Prices incl. VAT
- Applicable on Beetle/Karmann Ghia 1952 and later rear | Beetle/Karmann Ghia 1952 until 7.1965 front | Bus until 7.1967 rear | Bus until 7.1979 front | Type 3 front and rear | Thing rear
- Paruzzi number: 1303
- Original VW number: 113513031M
86 items available
Prices incl. VAT
- Applicable on Beetle/Karmann Ghia 10.1952 and later rear | Bus until 7.1967 rear | Type 3 rear | Thing rear
- Paruzzi number: 1309
30 items available
Prices incl. VAT
- Applicable on Beetle 10.1952 and later | Karmann Ghia
- Paruzzi number: 3903
- Original VW number: 113513031R
5 items available
Prices incl. VAT
- Applicable on Beetle rear (IRS) | Karmann Ghia rear (IRS) | Type 3 rear (IRS) | Thing rear (IRS)
- Paruzzi number: 3905
1 item available
Prices incl. VAT
- Applicable on Bus 8.1971 until 7.1979 rear
- Paruzzi number: 21305
2 items available
Prices incl. VAT
- Applicable on Bus 8.1967 until 7.1971 rear
- Paruzzi number: 21307
26 items available
Prices incl. VAT
- Applicable on Bus 8.1967 until 7.1979 rear
- Paruzzi number: 21309
30 items available
Prices incl. VAT
- Applicable on Beetle VW 1200, VW 1300 and VW 1500 8.1965 and later | Karmann Ghia 8.1965 and later | Thing | Note: | Replace the supplied nuts with locknuts (see the Options tab) and do not overtighten them, to prevent the rubber parts from being placed under excessive stress
- Paruzzi number: 1376
72 items available
Prices incl. VAT