Product description
The ideal shock absorber for Buggies, Bajas and other vehicles where additional spring force and increased ride height are desired.
A spring is fitted around the shock absorber, with preload adjustable in 5 positions. This allows not only the spring force to be adjusted, but also the ride height to be influenced.
Even in the lowest setting, the spring remains under preload and the ride height is higher than with a standard shock absorber. Keep this in mind during installation. First mount the upper end of the shock absorber, then place a jack underneath it and raise it until the lower end can also be mounted.
Please note: The lower mounting is fitted with a metal bushing pressed into the rubber. When removing the old shock absorbers, this bushing sometimes remains rusted onto the suspension arm or mounting bolt. This can make it appear that the new shock absorber does not fit.
Therefore, check that the old bushing has been completely removed before installing the new shock absorber. If the bushing is rusted in place, carefully cut into it with an angle grinder and then tap it loose.
Note: Replace the supplied nuts with self-locking nuts (see Options tab). Do not overtighten them, as this could put excessive pressure on the rubber bushings.
54 items in stock
€108.05 (Per pair)
Prices incl. VAT
- Order before 3PM (CET)? Shipped the same day!
- Do you have questions? We are reachable until 17h (CET).
- VW specialist since 1989
- 30 days return period
Beetle VW1200, VW1300 and VW1500 from 8.1965 onwards
Karmann Ghia from 8.1965 onwards
Trekker all years
| Manufacturer | Paruzzi BV |
|---|---|
| Manufacturer address | Kreeft 16, 4401NZ Yerseke, Nederland |
| Manufacturer contact | sales@paruzzi.com |
| Country of origin | Taiwan |
Specifications
| Paruzzi number | 1376 |
|---|---|
| Brand | Paruzzi |