Product description

The crankshaft pulley is too close to the engine's cooling shroud and cannot be removed with a conventional pulley puller while the engine is in the car.

With this puller this becomes possible, this tool is designed to help remove the crankshaft pulley on all type 1 air cooled engines.

Once the crankshaft bolt is removed, place the puller tool around the crankshaft pulley and tighten the tool. When the crankshaft pulley comes off, pull it off the crankshaft in this manner.

If the crankshaft pulley is too tight, do not continue to turn, you will damage both your pulley and the pulling tool. Make sure the puller is tightened under tension on the crankshaft pulley and gently tap the back of the crankshaft pulley until it comes off by itself. If this does not work, you will have to disassemble the engine and do the job with a conventional pulley puller, but chances are the crankshaft pulley will not survive.

Note: This puller is only suitable for steel pulleys.

Crankshaft pulley aid tool

100 items in stock

€47.04 (Each)

Prices incl. VAT

Order before 3PM (CET)? Shipped the same day!
Do you have questions? We are reachable until 17h (CET).
VW specialist since 1989
30 days return period

Type-1 engines

Note:
Only for steel pulleys

General safety warning

Download Manual

Manufacturer	SCAT Enterprises Inc.
Manufacturer address	1400 Kingsdale Avenue, CA 90278 Redondo Beach, USA
Manufacturer contact	310-919-3209
Rep EU	Paruzzi BV
Rep Address EU	Kreeft 16, 4401NZ Yerseke, Nederland
Rep Contact EU	sales@paruzzi.com
Country of origin	CN