Product description
As standard, the cylinder head is mounted cold onto the cylinder, without a gasket or sealing material. On engines with a larger displacement, and usually a higher compression ratio, this can lead to leakage more quickly than on a standard engine. It is therefore also necessary to use shims to achieve the desired compression ratio.
By using these copper cylinder head rings, all irregularities between the cylinder head and the cylinder are compensated. This ensures a good and reliable seal. The ring also functions as a spacer shim.
Never use two rings stacked on top of each other in the cylinder head. If more than one ring is required, install one ring between the cylinder and the cylinder head and one ring between the crankcase and the cylinder. These rings are available in multiple thicknesses and are listed under the Options tab.
These copper shims are available in various thicknesses and for different cylinder head sizes. For each ring, the thickness and the outer diameter are specified. The outer diameter corresponds to the inner diameter of the cylinder head. It is also indicated which common cylinder bores the ring corresponds to.
It is possible to reuse these copper rings by heating them until red hot and then allowing them to cool slowly. Despite this possibility, we recommend replacing the rings and not reusing them.
Copper cylinder head spacers
2 items in stock
€53.40 (4 pieces)
Prices incl. VAT
- Order before 3PM (CET)? Shipped the same day!
- Do you have questions? We are reachable until 17h (CET).
- VW specialist since 1989
- 30 days return period
Type-1 engines
Type-3 engines
CT/CZ engines
| Manufacturer | EMPI Inc. |
|---|---|
| Manufacturer address | 301 E Orangethorpe Ave., CA 92801 Anaheim, USA |
| Manufacturer contact | info@empius.com |
| Rep EU | JP Group as |
| Rep Address EU | Hjulmagervej 5, DK 8800 Viborg, Denmark |
| Rep Contact EU | quality@jpgroup.dk |
| Country of origin | CN |
Specifications
| Paruzzi number | 2986 |
|---|---|
| Brand | EMPI |
| Cylinder bore | 94.0 mm |
| Material | Copper |
| Outer diameter | 101 mm |
| thickness | 1.127 mm |
Share:
- Applicable on Type-1 engines | Type-3 engines | CT/CZ engines
- Paruzzi number: 3040
11 items available
Prices incl. VAT
- Applicable on Type-1 engines | Type-3 engines | CT/CZ engines
- Paruzzi number: 3041
5 items available
Prices incl. VAT
- Applicable on Type-1 engines | Type-3 engines | CT/CZ engines
- Paruzzi number: 3042
6 items available
Prices incl. VAT
- Applicable on Type-1 engines | Type-3 engines | CT/CZ engines
- Paruzzi number: 3043
7 items available
Prices incl. VAT
- Applicable on Type-1 engines | Type-3 engines | CT/CZ engines
- Paruzzi number: 3044
4 items available
Prices incl. VAT
- Applicable on Type-1 dual port engines | Type-3 dual port engines | CT/CZ engines
- Paruzzi number: 1874
3 items available
Prices incl. VAT
- Applicable on Type-1 engines | Type-3 engines | CT/CZ engines
- Paruzzi number: 2979
29 items available
Prices incl. VAT
- Applicable on Type-1 engines | Type-3 engines | CT/CZ engines
- Paruzzi number: 2980
- Original VW number: 311101387A
7 items available
Prices incl. VAT
- Applicable on Type-1 engines | Type-3 engines | CT/CZ engines
- Paruzzi number: 2981
- Original VW number: 311101389A
35 items available
Prices incl. VAT
- Applicable on Type-1 engines | Type-3 engines | CT/CZ engines
- Paruzzi number: 2982
3 items available
Prices incl. VAT
- Applicable on Type-1 engines | Type-3 engines | CT/CZ engines
- Paruzzi number: 2983
2 items available
Prices incl. VAT
- Applicable on Type-1 engines | Type-3 engines | CT/CZ engines
- Paruzzi number: 2984
2 items available
Prices incl. VAT
- Applicable on Type-1 engines | Type-3 engines | CT/CZ engines
- Paruzzi number: 2985
3 items available
Prices incl. VAT