Product description

Our Volkswagens are full of screws, bolts, nuts and washers that are not all made for a particular model, but are used universally. These parts are recognizable by their part number starting with the "N" of the German word "Normteile", which means "standard parts". It may be a standard part, but that does not mean it is still readily available today.

The hex bolts listed here are identical to the original, so also with a tensile strength of 10.9, which is important for the applications of these bolts.

Note: Always use Volkswagen specified bolts with the correct tensile strength. Never use bolts of the same size, but with a different tensile strength than the original.

Below is a list for each VW model of what these bolts are used for and how many pieces are needed in total.

Beetle
- crankcase halves assembly on 25 and 30 hp engines 7 pcs.
- master cylinder on bulkhead Beetle 1302 and 1303 2 pcs.

Karmann Ghia
- assembly of crankcase halves on 30 hp engines 7 pcs.
- bumper guards on front bumper 2 pcs.

Split Bus
- assembly of crankcase halves on 25 and 30 hp engines 7 pcs.
- front bumper stop assembly on upper bumper bolts 2 pcs.these

Vanagon
- assembly of crankcase halves on upper engines Type 4 with carburetors 1 piece
- assembly of double pulley on diesel engines from 8.1984 to 7.1985 1 piece
- double pulley assembly on Diesel engines from 8.1985 4 pieces
- water pump bearing Diesel housing to housing 1 piece
- steering housing to housing from 8.1985 incl. all years Syncro 4 pieces
- dynamo support set Diesel engines from August 1985 1 piece
- exhaust pipe on intermediate bend WBX (DG and DJ) from 8.1987 incl. Syncro 3 pieces

Type 3
- air intake manifold support set for fuel injection engines 1 piece
- up to 7.1969 front bumper rose assembly 2 pieces