Product description
If your fuel pressure regulator doesn't allow you to fit a pressure gauge, you can fit this adapter between the outgoing fuel hose.
The adapter is supplied without end fittings. Order clamps of the required diameter, see "Options" tab.
Once you've set the correct pressure, it's advisable to dismantle the fuel pressure gauge and use the supplied blind plug to seal the connection.
As the thread is tapered, there's no need to add sealant or tape. Turn the fuel pressure gauge or the blind plug slightly tighter than by hand, start the engine, check for leaks and retighten the pressure gauge or plug a little more if necessary.
Fuel pressure gauge hose adapter
11 items in stock
€15.60 (Each)
Prices incl. VAT
- Order before 3PM (CET)? Shipped the same day!
- Do you have questions? We are reachable until 17h (CET).
- VW specialist since 1989
- 30 days return period
fuel pressure gauge #6692
| Manufacturer | Officina Meccanica Malpassi s.r.l. a socio unico |
|---|---|
| Manufacturer address | Via Londra 50/52, 20831 Seregno (MB), Italy |
| Manufacturer contact | +39 0362 320425 |
| Country of origin | it |
Specifications
| Paruzzi number | 6693 |
|---|---|
| Brand | Malpassi |
| Thread size | 1/8 inch NPT |
Share:
- Applicable on fuel pressure regulator #6690 and adaptor #6693
- Paruzzi number: 6692
22 items available
Prices incl. VAT
- Paruzzi number: 6690
15 items available
Prices incl. VAT
- Applicable on Maximum pressure: 0.48 bar (7 PSI) | Thread size: 1/8 inch NPT | Note: | use only unleaded gasoline
- Paruzzi number: 1689
19 items available
Prices incl. VAT
