Product description
The license plate is not a beauty in itself. But unfortunately, it is mandatory worldwide that your car has a clear and legible identification code on it, whether we like it or not.
With this chrome license plate holder, you can turn a boring license plate into a showpiece where you don't have to drill through the license plate, as the attachment to your car is behind your license plate.
The largest license plates are the so-called GAIK license plates, GAIK meaning : Controlled issue and collection of license plates. These number plates are standardised throughout Europe and can be recognised by a blue section bearing the EU sign and the code of the country where the car is registered.
In order to comply with all European directives, these license plate holders are manufactured with great precision, exactly to the dimensions of the license plate.
Mounting: The edge consists of two parts, unscrew the screws in the connectors from the top and slide them out of the connectors. Loosen the other screws as far as possible so that the number plate is not obstructed when retracting. Slide the number plate into the lower part (where the screws are still fitted) followed by the top. Check if the screw holes are perfectly aligned, if this is the case, you can tighten and tighten the screws. If the holes don't match 100%, there are burrs or other irregularities at the edge of your license plate that prevent the license plate from sliding far enough. Do not use force but file the irregularities and/or burrs of the license plate edges and you will see that the screw holes do match.
Caution! Measure your license plate before ordering, there have been several sizes over the years, only the largest sizes are standardized in Europe.
Chromed aluminum license plate holder
466 items in stock
€37.04 (Each)
Prices incl. VAT
- Order before 3PM (CET)? Shipped the same day!
- Do you have questions? We are reachable until 17h (CET).
- VW specialist since 1989
- 30 days return period
| Manufacturer | Paruzzi BV |
|---|---|
| Manufacturer address | Kreeft 16, 4401NZ Yerseke, Nederland |
| Manufacturer contact | sales@paruzzi.com |
| Country of origin | Taiwan |
Specifications
| Paruzzi number | 4302 |
|---|---|
| Brand | Madebyparuzzi |
| Length | 520 mm |
| Width | 110 mm |
Share:
- Applicable on Beetle USA models until 7.1967 | Karmann Ghia USA models until 7.1971 | Bus USA models until 7.1967 | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 479
6 items available
Prices incl. VAT
- Applicable on Beetle | Karmann Ghia | Bus | Type 3 | Thing | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 1168
17 items available
Prices incl. VAT
- Applicable on Beetle 8.1967 and later (1200 8.1973 and later) | Karmann Ghia 8.1971 and later | Bus 8.1972 and later | Type 3 8.1969 and later | Thing | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 4168
10 items available
Prices incl. VAT
- Applicable on only for USA license plate | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 281
1 item available
Prices incl. VAT
- Paruzzi number: 4300
621 items available
Prices incl. VAT
- Paruzzi number: 4305
505 items available
Prices incl. VAT
- Paruzzi number: 4306
582 items available
Prices incl. VAT