Product description
On Type 1 engines built between 1959 and 1963, the spark plug cables are held in place by a rubber collar. Here, the cables are first inserted into the holder, then the spark plug cap is fitted.
From 1963 onwards, Volkswagen adopted plastic collars for these engines, into which the cables could be easily snapped. At first, Type 3 engines had only plastic collars into which the spark plug cable snapped.
On Type 1 engines, this collar was attached to the coolant sump, while on Type 3 engines, a special bracket was installed for this purpose.
From 1976, on 1200 cc engines, the bracket on the side of the cooling box, which previously held the fuel line, was removed. The left-most spark plug cable clamp was replaced by a combination clamp that could accommodate two spark plug cables as well as the fuel line.
The three-cable spark plug cable holder was only used on these engines from then on. Volkswagen subsequently withdrew the double cable holder from its range, and only supplied the triple variant as a spare part.
This cable holder can be used without problem for just two cables, but those wishing to use their 1200 cc engine exactly as it came from the factory should fit two holders for two cables and one holder for three cables.
If you'd like to organize your spark plug cables even more neatly, take a look at the "Options" tab. Here you'll find additional clips for even tidier cable fixing.
Ignition wire holder for 2 wires
1140 items in stock
€1.29 (Each)
Prices incl. VAT
- Order before 3PM (CET)? Shipped the same day!
- Do you have questions? We are reachable until 17h (CET).
- VW specialist since 1989
- 30 days return period
Type-1 engines 1963 and later
Type-3 engines until 7.1969
Do you want to know where this part belongs? Consult the exploded view drawing.
View drawing| Manufacturer | Paruzzi BV |
|---|---|
| Manufacturer address | Kreeft 16, 4401NZ Yerseke, Nederland |
| Manufacturer contact | sales@paruzzi.com |
| Country of origin | tw |
Specifications
| Paruzzi number | 4055 |
|---|---|
| Original VW number | 311905451, 111905451A |
| Brand | Paruzzi |
Share:
- Applicable on Type-1 engines until 1988 (11-J-012 804)
- Paruzzi number: 2040
77 items available
Prices incl. VAT
- Applicable on Type-1 engines until 1988 (11-J-012 804)
- Paruzzi number: 2042
57 items available
Prices incl. VAT
- Applicable on Type-1 engines until 1988 (11-J-012 804)
- Paruzzi number: 2043
51 items available
Prices incl. VAT
- Applicable on Type-1 engines until 1988 (11-J-012 804)
- Paruzzi number: 2045
- Original VW number: 111998031A, 111998031C
278 items available
Prices incl. VAT
- Applicable on Type-1 engines 10.1992 and later
- Paruzzi number: 2162
- Original VW number: N03888514, N10285802, N10285801, 036035281A, 030905423A, 043035255, 122905449A, 030905423A
13 items available
Prices incl. VAT
- Applicable on Type-1 engines until 1988 (VIN 11-J-012 804)
- Paruzzi number: 2164
- Original VW number: 111998031A, 111998031C
172 items available
Prices incl. VAT
- Applicable on Type-1 engines until 1988 (11-J-012 804)
- Paruzzi number: 4045
21 items available
Prices incl. VAT
- Applicable on Type-3 engines
- Paruzzi number: 32164
- Original VW number: 311998031D
7 items available
Prices incl. VAT
- Applicable on Type-1 engines 1200cc 1976 (D 1 371 481) and later
- Paruzzi number: 2055
- Original VW number: 113905451A
814 items available
Prices incl. VAT
- Applicable on Beetle and Karmann Ghia until 7.1967 fuel tank breather hose | Bus: | 8.1971 until 7.1976 fuel tank hose | 8.1974 until 7.1977 L-jetronic fuel hose | 8.1973 until 7.1979 gas heater fuel hose | 8.1967 until 7.1979 spark plug wires Type-4 engine | Type 3 spark plug wires
- Paruzzi number: 3489
- Original VW number: 111201261, 211201249A
1 item available
Prices incl. VAT
- Applicable on Type-1 engines 1959 (engine number 2 938 464) until 1963
- Paruzzi number: 4054
- Original VW number: 111905451
17 items available
Prices incl. VAT