Product description
If you have not adjusted the valve clearance for a long period of time, the adjustment bolts and/or lock nuts can be very tight and difficult to unlock. Sometimes, cutting and/or damaging the thread is the only solution. In this case, you will need to install new sets of screws and/or lock nuts.
It is also possible that the set screws may be worn at an angle or hammered due to the age of the engine. In this case, the valve clearance can no longer be adjusted correctly, replacing the nuts and adjustment bolts is the only solution.
Different types were used for the different engines. If in doubt, measure the old adjusting screw before ordering. The latter is necessary in CT/CZ engines, two sizes are used in these engines.
Attention! Our adjusting screws and locking nuts are of very high quality, many adjusting screws on the after-market are of very poor quality and will be broken after a few kilometers. It is an important part to keep the valves intact, so don't use cheap alternatives, it can cost you a lot of money.
Note: M8 x 1.0 locknuts have a dual function: they were also used as locknuts for the stabilizer bar bolts on Beetle, Karmann Ghia, VW Thing and Type 3 models fitted with swing axles.
Valve adjustment screws
925 items in stock
€36.70 (8 pieces)
Prices incl. VAT
- Order before 3PM (CET)? Shipped the same day!
- Any questions? We're reachable until 17h (CET).
- VW specialist since 1989
- 30 days return period
Type-1 engines until 1983 (VIN 11-E-119 815)
Type-3 engines
Type-4 engine 1700cc
CT/CZ engines
Do you want to know where this part belongs? Consult the exploded view drawing.
View drawingSpecifications
| Paruzzi number | 1782 |
|---|---|
| Original VW number | 111109451 043109451 |
| Brand | EMC |
| Freight | No |
| Thread size | M8 x 1.0 |
Share:
Complete your order:
- Applicable on Valve adjustment screw: | Type-1 engines until 1983 (VIN 11-E-119 815) | Type-3 engines | Type-4 engines 1700cc | CT/CZ engines | Equalizer torsion bar bolt: | Beetle | Karmann Ghia | Type-3 | Kübel
- Paruzzi number: 1725
- Original VW number: N0111521 N111521 N0111525
300 items available
incl. vat
- Applicable on Type-1 engines 1200cc (except 25hp+30hp) | Type-1 engines 1300-1500-1600cc | Type-3 engines | CT/CZ engines | Waterboxer engines
- Paruzzi number: 1956
- Original VW number: 113101481F 113101483D
1368 items available
incl. vat
- Applicable on Type-4 engines
- Paruzzi number: 41773
- Original VW number: 021101481
170 items available
incl. vat
- Applicable on Type-1 until 1983 (VIN 11-E-119 815) | Type-3 | Type-4 1700cc | CT/CZ
- Paruzzi number: 1784
5 items available
incl. vat
- Applicable on Type-1 until 1983 (VIN 11-E-119 815) | Type-3 | Type-4 1700cc | CT/CZ
- Paruzzi number: 3784
5 items available
incl. vat
- Applicable on Type-1 engines until 1983 (VIN 11-E-119 815) | Type-3 engines | Type-4 engine: 1700cc | CT/CZ engine
- Paruzzi number: 4129
101 items available
incl. vat