Product description

The bolts on the door hinges may be very tight (usually due to rust). Before attempting to loosen the bolts, it is advisable to spray the bolts through the openings with WD-40 in combination with the Rust Reactor (both can be found in the 'Options' tab). Give it time to adjust, then carefully unscrew the bolts. If it's difficult, turn the bolt back one turn, spray again, let the product soak in and try again to loosen it. Repeat this process until the bolt is removed in one piece.

In addition to a little patience, you will need a well-fitting Phillips screwdriver. If the bolt breaks or the threaded plate turns, you will need to replace the threaded plate.

The threaded plates are loosely locked into the A-pillar, this is necessary to allow the door to be adjusted, so you should not weld them in.

Door hinge threaded plate

6 items in stock

€33.44 (Each)

Prices incl. VAT

Order before 3PM (CET)? Shipped the same day!
Do you have questions? We are reachable until 17h (CET).
VW specialist since 1989
30 days return period

right lower
Beetle all years

left upper
Beetle until 7.1972

General safety warning

Do you want to know where this part belongs? Consult the exploded view drawing.

View drawing

Specifications

Paruzzi number	139
Original VW number	111805374
Brand	Volkswagen germany

Options

Hex hinge bolts

Applicable on Beetle doors | Bus Pickup 8.1967 until 7.1979 side gates | Thing doors, engine lid and windshield
Paruzzi number: 476

214 items available

€7.90

Prices incl. VAT

Phillips head hinge bolts

Applicable on Beetle doors | Bus Pickup 8.1967 until 7.1979 side gates | Thing doors, engine lid and windshield
Paruzzi number: 4477
Original VW number: N142881 N0142881

1877 items available

€6.90

Prices incl. VAT