Product description

All buses intended for goods transport are decorated as simply as possible in the loading area, to keep the costs as low as possible. The buses for passenger transport are neatly finished, however, there are numerous details that are finished on these buses, while this was not applicable on the version for goods transport. So it is also with the lock of the sliding door, which on the buses for passenger transport is finished with a protective cap, on buses for freight transport this was not the case. This plastic cover is cracked and/or scratched on many buses. The cover cap is available for both sliding doors on the left or right side. On left-hand drive cars it is standard on the right side, while on right-hand drive cars it is the other way around. There are also buses equipped with a double sliding door and even buses that had the door on the other side than what was standard. The latter version was always manufactured by Volkswagen on special request and was not ready-made in the showroom. The cover caps are a perfect reproduction of the original, in black ABS with the correct motif.

Cover
#20379 from August 1967 up to July 1979 with sliding door on the left side
#20380 from August 1967 up to July 1979 with sliding door on the right

Mounting screws
Also order the mounting screws with it, in case the required screw is not yet included in the Paruzzi program at least the dimensions are mentioned, so you can get them at the nuts and bolts specialist store.

Side from August 1973 and later :
dimension : 3.5 x 13 mm
number needed : 1
#70403 Plate screw with round countersunk head

Side until July 1973 :
dimensions : 4.2 x 9.5 mm
number required : 1
not available

Front side, all years :
dimensions : 4.2 x 9.5 mm
number required : 2
not available