Product description
If the oil pressure warning light comes on regularly at idle, it's quite possible that the oil pump is worn, in which case the oil pressure should be measured.
The following information applies to Type 1, Type 3, CT/CZ and WBX engines only:
Oil pressure should be measured at an oil temperature of 70 degrees and an engine speed of 2,500 rpm. The measured pressure must now be at least 2 bar. Gear play must not exceed 0.2 mm, and the oil pump cover must not show deep gear wear (there must be no more than 0.1 mm play between the oil pump cover and the gears). Wear on the end of the drive pinion is always noticeable, but should not be too severe either. When dismantling the oil pump, it is advisable to remove the threaded ends first, after which you can use an oil pump puller to remove the pump from the housing effortlessly and without damage.
The following information applies to Type 4 engines only:
Oil pressure must be measured at an oil temperature of 80 degrees and an engine speed of 2000 rpm. The measured pressure must be at least 2 bar under these conditions. When dismantling the oil pump, we recommend removing the threaded ends first. The pump can then be carefully lifted out of the housing using two crutches. The replacement pump offered here has a slightly higher flow rate than the original version, and therefore offers nothing but advantages. Unlike the standard pump, which has a 2 mm shorter gear, this version ensures better oil flow and therefore more reliable engine lubrication.
The following information applies to diesel engines only:
The oil pump of a diesel engine is accessible after removing the crankcase. Oil pressure should be measured at an oil temperature of 80 degrees and an engine speed of 2000 rpm. The measured pressure should now be at least 2 bar. The clearance between the gears must not exceed 0.2 mm, and the clearance between the edge of the housing and the gears must not exceed 0.15 mm. Wear at the end of the drive pinion is always noticeable, but should not be too great. The oil pump is supplied as a complete part, but without the track seal, which must be added (see "Options" tab).
Oil pump for vehicles with power brakes
1 items in stock
€51.40 (Each)
Prices incl. VAT
- Order before 3PM (CET)? Shipped the same day!
- Do you have questions? We are reachable until 17h (CET).
- VW specialist since 1989
- 30 days return period
Diesel engines
Specifications
| Paruzzi number | 71803 |
|---|---|
| Original VW number | 068115105BP |
| Brand | Topran |
Share:
- Applicable on water cooled engines
- Paruzzi number: 51660
2 items available
Prices incl. VAT
- Applicable on water cooled engines
- Paruzzi number: 51661
14 items available
Prices incl. VAT
- Applicable on Diesel engines
- Paruzzi number: 71827
- Original VW number: 068115561B
23 items available
Prices incl. VAT
- Applicable on Diesel engines | Note: | modified version
- Paruzzi number: 71852
- Original VW number: 044103609D
12 items available
Prices incl. VAT
- Applicable on as locking bolt for the automatic transmission for: | Beetle | Karmann Ghia | as engine oil drain plug for: | Type-4 engines | Waterboxer engines | Diesel engines 8.1985 and later
- Paruzzi number: 41850
- Original VW number: N0297012 N0297014 001301229
116 items available
Prices incl. VAT
- Applicable on Diesel engines
- Paruzzi number: 71850
- Original VW number: 068103601AB
14 items available
Prices incl. VAT
- Applicable on Type 1 engines up to 1967* | Type 3 engines up to 1967* | * Type 1 engine | 25 hp and 30 hp all model years | 1200cc 34 hp without engine code up to 7.1965 | 1200cc with engine code D up to D 0 230 000 | 1300cc with engine code E up to E 0 013 650 | 1300cc with engine code F up to F 1 225 018 | 1500cc with engine code L up to L 0 018 099 | 1500cc with engine code H up to H 0 822 051 | * Type 3 engine | 1500cc without engine code up to 7.1965 | 1500cc with engine code K up to K 0 090 195 | 1500cc with engine code M up to M 0 001 256 | 1600cc with engine code T up to T 0 445 097
- Paruzzi number: 1886
- Original VW number: 111115107 311115107 111115111A
3 items available
Prices incl. VAT
- Applicable on Type 1 engines 1967 to 7.1969* | Type 3 engines 1967 to 7.1969* | * Type 1 engine | 1200cc with engine code D from D 0 230 001 | 1300cc with engine code E from E 0 013 651 | 1300cc with engine code F from F 1 225 019 | 1500cc with engine code L from L 0 018 100 | 1500cc with engine code H from H 0 822 052 | 1600cc with engine code B all model years | * Type 3 engine | 1500cc with engine code K from K 0 090 196 | 1500cc with engine code M from M 0 001 257 | 1600cc with engine code T from T 0 445 098 | 1600cc with engine code P all model years | 1600cc with engine code U all model years
- Paruzzi number: 1887
- Original VW number: 311115107A 311115123A 311115115 311115107A
2 items available
Prices incl. VAT
- Applicable on Type-1 engines: | 1300, 1500 and 1600cc 8.1969 until 7.1971 | 1200cc 8.1969 and later | Type-3 engines: | 8.1969 until 7.1971
- Paruzzi number: 1888
- Original VW number: 111115107A 311115123A 111115115B 311115107A
29 items available
Prices incl. VAT
- Applicable on Type-1 engines 1300 and 1600cc 8.1971 and later | Type-3 engines 8.1971 and later | CT/CZ engines | Waterboxer engines
- Paruzzi number: 1889
- Original VW number: 111115107B 111115123B 111115115C
25 items available
Prices incl. VAT
- Applicable on Type-4 engines
- Paruzzi number: 41889
37 items available
Prices incl. VAT