Product description
On all Volkswagen Vanagon models, the camber (the angle at which the tyres are on the asphalt) is adjusted using the mounting bolt on the upper support arm, which is eccentric. It is not the bolts that are eccentric but the washers through which these flat-faced bolts pass. Rust is the biggest culprit because the camber can no longer be adjusted. If you are afraid to unscrew this bolt, use a rustproofing product (e.g. WD-40 ) and try to remove it carefully, if it is irreparable, order the bolts (see options tab).
Eccentric bushings are often damaged, so replacement is the best solution so that the camber can be readjusted to the correct value again.
These rings have a thickness of 4 mm, which can only be important for a Syncro for the correct adjustment.
The rings can also be used on models up to March 1982, but then in combination with new bolts (see options tab)
Excenterring upper wishbone (thickness 4 mm)
3 items in stock
€14.80 (4 pieces)
Prices incl. VAT
- Order before 3PM (CET)? Shipped the same day!
- Any questions? We're reachable until 17h (CET).
- VW specialist since 1989
- 30 days return period
Vanagon/T25 4.1982 and later
Vanagon/T25 until 3.1982 (Also use bolt #71380)
Specifications
| Paruzzi number | 71381 |
|---|---|
| Original VW number | 251407133A |
| Brand | Paruzzi |
| Freight | No |
Share:
Complete your order:
- Applicable on Vanagon/T25 4.1982 and later | Vanagon/T25 until 3.1982 (Also use excenterring #71381)
- Paruzzi number: 71380
- Original VW number: 251407053A
6 items available
incl. vat
- Applicable on Vanagon/T25
- Paruzzi number: 71331
- Original VW number: 251407361
88 items available
incl. vat
- Applicable on Vanagon/T25
- Paruzzi number: 71337
- Original VW number: 251407077
1 item available
incl. vat
- Applicable on Vanagon/T25 except Syncro
- Paruzzi number: 71382
- Original VW number: 251407047B
2 items available
incl. vat