Product description
On all Volkswagen Vanagon models, the camber (the angle at which the tyres are on the asphalt) is adjusted using the mounting bolt on the upper support arm, which is eccentric. It is not the bolts that are eccentric but the washers through which these flat-faced bolts pass. Rust is the biggest culprit because the camber can no longer be adjusted. If you are afraid to unscrew this bolt, use a rustproofing product (e.g. WD-40) and try to remove it carefully. If the flat sides on which the eccentric rings are held are worn or damaged by rust, adjustment will be difficult, resulting in undesirable handling and excessive tire wear.
Also carefully check the eccentric rings and replace them at the same time, they will probably be worn (see the Options tab).
These bolts can also be used on models up to March 1982 but then in combination with new eccentric bushings (see options tab)
Cylinder bolt upper wishbone
6 items in stock
€82.15 (Per pair)
Prices incl. VAT
- Order before 3PM (CET)? Shipped the same day!
- Any questions? We're reachable until 17h (CET).
- VW specialist since 1989
- 30 days return period
Vanagon/T25 4.1982 and later
Vanagon/T25 until 3.1982 (Also use excenterring #71381)
Specifications
| Paruzzi number | 71380 |
|---|---|
| Original VW number | 251407053A |
| Brand | Paruzzi |
| Freight | No |
Share:
Complete your order:
- Applicable on Vanagon/T25 4.1982 and later | Vanagon/T25 until 3.1982 (Also use bolt #71380)
- Paruzzi number: 71381
- Original VW number: 251407133A
3 items available
incl. vat
- Applicable on Vanagon/T25
- Paruzzi number: 71331
- Original VW number: 251407361
88 items available
incl. vat
- Applicable on Vanagon/T25
- Paruzzi number: 71337
- Original VW number: 251407077
1 item available
incl. vat
- Applicable on Vanagon/T25 except Syncro
- Paruzzi number: 71382
- Original VW number: 251407047B
2 items available
incl. vat