Product description
The Weber DFEV 32/36 and EMPI EPC 32/36F are progressive carburettors that combine the advantages of a relatively small carburettor during normal driving with increased airflow when more power is required. During normal driving and part throttle, mainly the first 32 mm stage is used. As the accelerator is opened further, the second 36 mm stage progressively opens as well. This provides considerably greater air/fuel flow under higher engine loads.
This carburettor kit is intended for Type 4 engines where the original side-mounted carburettors are replaced by one centrally mounted 32/36 progressive carburettor. During normal driving, mainly the smaller first stage is used, allowing more economical driving. When more power is required, the second stage progressively opens as well and the full capacity of the carburettor becomes available.
For this carburettor kit, the use of a 009 distributor or a suitable 123 ignition is recommended. With a correctly matched ignition advance curve, you can get the maximum performance from the carburettor.
As with any carburettor, and particularly one that was never fitted as standard to the engine concerned, correct jetting and adjustment are very important. The standard jetting should be regarded as a starting point; engine size, engine modifications and operating conditions may require different jetting. For the best result, we recommend having the engine tuned on a rolling road.
The kits are available with an original Weber DFEV 32/36 or an EMPI EPC 32/36F carburettor. Weber has proven its quality and reliability over many years. The EMPI EPC 32/36F operates according to the same progressive 32/36 principle and offers a more attractively priced alternative. The other progressive carburettor can be found under the Alternatives tab.
1 items in stock
€632.64 (Per set)
Prices incl. VAT
- Order before 3PM (CET)? Shipped the same day!
- Do you have questions? We are reachable until 17h (CET).
- VW specialist since 1989
- 30 days return period
Type 4 engines
Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
| Manufacturer | EMPI Inc. |
|---|---|
| Manufacturer address | 301 E Orangethorpe Ave., CA 92801 Anaheim, USA |
| Manufacturer contact | info@empius.com |
| Rep EU | JP Group as |
| Rep Address EU | Hjulmagervej 5, DK 8800 Viborg, Denmark |
| Rep Contact EU | quality@jpgroup.dk |
| Country of origin | tw |
Specifications
| Paruzzi number | 42122 |
|---|---|
| Brand | EMPI |