Product description
The correct positioning of the crank seal saves a lot of effort later on, there is no one who would want to do it a second time. So don't take any risks and use the right tools.
Two types of tools are available for the crank seal behind the flywheel of the type 1, type 3, CT or CZ engines.
The standard model is intended for engines equipped with the original crankshaft with standard length dowel pins, this model is also equipped with a clamping bolt.
There is also an extra deep model for crankshafts with longer dowel pins. On this model, you first press the crank seal with the flat part until it touches the dowel pins, then use the other side and press the crank seal further in. This extra deep mounting tool is supplied without clamping bolt, use your flywheel bolt for this purpose.
For type 4 engines, a similar tool is available, only for the crank seal on the pulley side.
Crank seal (flywheel side) stock installation tool
4 items in stock
€68.80 (Each)
Prices incl. VAT
- Order before 3PM (CET)? Shipped the same day!
- Any questions? We're reachable until 17h (CET).
- VW specialist since 1989
- 30 days return period
Beetle (except 25hp+30hp)
Type 3
CT/CZ
Specifications
| Paruzzi number | 1105 |
|---|---|
| Original VW number | VW204 |
| Brand | EMPI |
Share:
- Applicable on Beetle (except 25hp+30hp) | Type 3 | CT/CZ
- Paruzzi number: 1105
- Original VW number: VW204
4 items available
incl. VAT
- Applicable on Type-1 engines except 25hp+30hp | Type-3 engines | CT/CZ engines
- Paruzzi number: 4119
11 items available
incl. VAT
- Applicable on Type-4 engines
- Paruzzi number: 44119
8 items available
incl. VAT