Product description
With a hydraulic brake lock switch you can quickly lock and unlock the brakes. It is located between the master cylinder and the line leading to the rear wheels and operates as follows : after fully depressing the foot brake, you press this lock button, the brakes are then locked, by depressing the brake pedal again, the lock is released, which is much quicker than applying the hand brake. If you use two switches on the front brake lines, you can get a perfect "burn-out".
The connections are not supplied with metric wire like our complete brake system but NF (American National Fine) wire, you will need to adjust your brake lines for this. Use only DOT 3 brake fluid, if you use any other alternative it may cause internal damage and void any warranty.
Warning: You cannot use this switch to replace the hand brake, it must be present at all times.
Hydraulic park lock
2 items in stock
€74.80 (Each)
Prices incl. VAT
- Order before 3PM (CET)? Shipped the same day!
- Do you have questions? We are reachable until 17h (CET).
- VW specialist since 1989
- 30 days return period
| Manufacturer | EMPI Inc. |
|---|---|
| Manufacturer address | 301 E Orangethorpe Ave., CA 92801 Anaheim, USA |
| Manufacturer contact | info@empius.com |
| Rep EU | JP Group as |
| Rep Address EU | Hjulmagervej 5, DK 8800 Viborg, Denmark |
| Rep Contact EU | quality@jpgroup.dk |
| Country of origin | CN |
Specifications
| Paruzzi number | 1296 |
|---|---|
| Brand | EMPI |
| Thread size | UNF 3/8 - 24 |
Share:
- Applicable on stock applications | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 50100
103 items available
Prices incl. VAT
