Product description

If you don't want the heat exchangers to expire on a higher horsepower engine where high power is achieved by an exhaust system with a larger tube diameter, use these high performance heat exchangers. The inner tube diameter is 35 mm (outer 38 mm). The connection between the exhaust system and the exchanger is a flanged connection, where gaskets for the larger diameter must be used (see the "Options" tab).

To mount the heat exchanger, it is necessary to weld the supplied connecting flanges to your existing exhaust system. As the heaters are designed to lose as little energy as possible, they are very light, which means that the aluminium part around the exhaust pipe is missing. The heat output is therefore lower than that of a standard exchanger. But it's better to have a little less heat while maintaining engine power, rather than without heating.

They are supplied in grey transport paint, excluding the control levers (see "options" tab), but with mounting flanges. The transport paint is intended to prevent rusting in the warehouse. If you want to keep the exchanger clean, you will have to treat it regularly with heat resistant paint. Immediately after switching on the heater, the transport paint will partially peel off.

The heaters are supplied without mounting material and without control levers, please order them immediately. See the "options" tab.

If you are looking for standard exchangers, chromed exchangers, exchangers for another type of engine or an exchanger replacement, look at the "related parts" tab.

High performance heat exchanger right

2 items in stock

€187.38 (Each)

Prices incl. VAT

Order before 3PM (CET)? Shipped the same day!
Do you have questions? We are reachable until 17h (CET).
VW specialist since 1989
30 days return period

Type-1 engine 1.1963 and later (except 30hp and AJ injection)

General safety warning

Manufacturer	JP Group as
Manufacturer address	Hjulmagervej 5, DK 8800 Viborg, Denmark
Manufacturer contact	quality@jpgroup.dk
Country of origin	dk

Specifications

Paruzzi number	1066
Brand	Classicline

Options

Copper exhaust gaskets for 38 mm tubing

Applicable on Type-1 engines | Type-3 engines | CT/CZ engines | Waterboxer engines
Paruzzi number: 1019

24 items available

€18.00

Prices incl. VAT

Paper exhaust gaskets from 35 mm tubing

Applicable on Type-1 engines | Type-3 engines | CT/CZ engines | Waterboxer engines
Paruzzi number: 1059

44 items available

€5.06

Prices incl. VAT

Heat exchanger lever including mounting kit left

Applicable on Beetle/Karmann Ghia 1.1963 and later (except USA injection) | Bus 1.1963 until 7.1967 | Thing civil
Paruzzi number: 1082
Original VW number: 043298147A, 113255117, N124341, N120571, N102052, 311129777, 111255309B, 111255311, 113255249, 111251261C, 113255147C, N0120571, 042255147A, 211255271

15 items available

€5.35

Prices incl. VAT

Heat exchanger lever including mounting kit right

Applicable on Beetle/Karmann Ghia 1.1963 and later (except USA injection) | Bus 1.1963 until 7.1967 | Thing civil
Paruzzi number: 1083
Original VW number: 043298148A, 113255117, N124341, N120571, N102052, 311129777, 111255309B, 111255311, 113255250, 111251261C, 113255148C, N0120571, 042255148A, 211255271

519 items available

€5.40

Prices incl. VAT

Heater cable mounting kit

Applicable on Beetle | Karmann Ghia | Bus with aircooled engine | Type 3 | Thing civil
Paruzzi number: 1086
Original VW number: 311129777, N124341, N102052, 111255309B, 111255311

471 items available

€1.75

Prices incl. VAT