Product description
After casting the engine block, cylinder head and intake manifold, various operations must be carried out during which it is necessary to make openings which are then closed with plugs.
In addition to the fact that the holes must be closed, these plugs have another important function, if the coolant were to freeze, the engine block, cylinder head or any other part through which the coolant flows would break due to expansion. The plug is now the weak point and will be pushed outwards, so you will only have to fit a new plug and damage will be limited.
If there is a leak around the cap or if it is weakened by rust, you will need to replace it. The plug is a fraction larger than the hole it is intended for and therefore it tightens, it should be tapped carefully, or pressed if possible.
WBX engines
2 pieces in cylinder head, 24.0mm
3 pieces in intake manifold, 24.0mm
Diesel engines
4 pieces in the engine block, 36.6mm
different number in the cylinder head, 24.0mm
Core plug
14 items in stock
€1.50 (Per pair)
Prices incl. VAT
- Order before 3PM (CET)? Shipped the same day!
- Any questions? We're reachable until 17h (CET).
- VW specialist since 1989
- 30 days return period
Water boxer engines: cylinder head and inlet manifold
Diesel engines: cylinder head
Specifications
| Paruzzi number | 74971 |
|---|---|
| Original VW number | N0119142 |
| Brand | Paruzzi |
| Diameter | 24 mm |
| Freight | No |
Share:
Complete your order:
- Applicable on Vanagon/T25
- Paruzzi number: 51650
6 items available
incl. vat