Product description
The ring or thrust washer between the outer front wheel bearing and the lock nut(s) must be flat and undamaged, as this ring is crucial for the adjustment of the wheel bearings. If the surface is not correct or if the ring is worn, the play in the wheel bearings cannot be adjusted correctly, which can lead to premature wear of the bearings.
Proceed as follows:
1. Tighten the nut against the bushing a little more than hand-tight and at the same time turn the brake drum or the brake disc to centre the bearings in the bearing bracket
2. Loosen the nut and retighten it until you can still move the thrust ring with a screwdriver.
3. Fasten the nut or nuts.
When replacing the wheel bearings, it is therefore important to check the thrust rings as well and, in case of doubt, replace them.
Front bearing thrust washers
8 items in stock
€6.90 (Per pair)
Prices incl. VAT
- Order before 3PM (CET)? Shipped the same day!
- Do you have questions? We are reachable until 17h (CET).
- VW specialist since 1989
- 30 days return period
Bus until 7.1963
Do you want to know where this part belongs? Consult the exploded view drawing.
View drawing| Manufacturer | Paruzzi BV |
|---|---|
| Manufacturer address | Kreeft 16, 4401NZ Yerseke, Nederland |
| Manufacturer contact | sales@paruzzi.com |
| Country of origin | be |
Specifications
| Paruzzi number | 21365 |
|---|---|
| Original VW number | 211405661 |
| Brand | Paruzzi |
| Inner diameter | 22 mm |
| Outer diameter | 54 mm |
Share:
- Applicable on Bus until 7.1963
- Paruzzi number: 21360
- Original VW number: 111405627 211405627 211405641A 211405681
9 items available
Prices incl. VAT
- Applicable on Beetle until 7.1965 | Karmann Ghia until 7.1965 | Bus except Syncro 8.1963 and later
- Paruzzi number: 1349
- Original VW number: 111405661
11 items available
Prices incl. VAT
- Applicable on Beetle 8.1965 and later | Karmann Ghia 8.1965 and later | Type 3 | Thing
- Paruzzi number: 1360
- Original VW number: 311405661
29 items available
Prices incl. VAT