Product description

The upper guide of the sliding door is mounted on a shaft that is mounted in a bracket with a nut fitting.

If the sliding door has not been maintained for a long period of time, causing the assembly to seize up, it regularly happens that not only the roller needs to be replaced, but also the fixing pin cannot be used again.

Remember that the guide roller rotates on the axle, with rust pitting causing additional play. In this case, replace the axle, and by lubricating it with lithium grease at each service, you will probably never need to replace it again.....

Sliding door guide roller mounting pin

Out of stock

€8.20 (Each)

Prices incl. VAT

Notify me when the item is available.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

By selecting continue you confirm that you have read our Privacy Policy and accepted our General terms and conditions. *

Order before 3PM (CET)? Shipped the same day!
Do you have questions? We are reachable until 17h (CET).
VW specialist since 1989
30 days return period

Bus 8.1967 until 7.1979

General safety warning

Specifications

Paruzzi number	20455
Original VW number	211843441A
Brand	Volkswagen germany

Options

Stainless steel washers M8

Applicable on Inner diameter: 8.4 mm | Outer diameter: 16 mm | Thickness: 1.6 mm | Material: Stainless steel A2
Paruzzi number: 7402
Original VW number: N01152520 N115252 N01152513

15 items available

€2.00

incl. VAT