Product description
When replacing the rear brake shoes, it is usually necessary to transfer the handbrake levers. They are fitted with a pin which is secured with a horseshoe-shaped clamp. To release the clamp, bend it slightly and slide it out of the pin's notch.
This clamp is for single use only and must always be replaced, because if it is reused (by tightening it again around the pin notch), metal fatigue will occur and, sooner or later, it will break with all the consequences that this implies.
When fitting new brake shoes, make sure you have a set of handbrake pin secure clips to hand.
These clips are included in some brake shoe assembly kits. If not, they are listed with the mounting kit in the "options" tab.
Note: There are many reproductions available that do not match the original in terms of size, so fitting the handbrake clevis is going to be quite a challenge and sometimes can only be fitted with modifications. The clamps listed here are 100% identical, so with the correct fit. If you are not sure whether your mounting pins are original VW or have ever been replaced by EMC brand pins, it is advisable to replace them with them (see tab “related parts”), only then you are assured of a perfect combination.
2204 items in stock
€3.40 (Per pair)
Prices incl. VAT
- Order before 3PM (CET)? Shipped the same day!
- Do you have questions? We are reachable until 17h (CET).
- VW specialist since 1989
- 30 days return period
Beetle
Karmann Ghia
Bus until 7.1979
Type 3
Thing
Do you want to know where this part belongs? Consult the exploded view drawing.
View drawing| Manufacturer | Westerwind Nederland BV |
|---|---|
| Manufacturer address | Kreeft 18, 4401NZ Yerseke, Nederland |
| Manufacturer contact | info@european-motorcompany.com |
| Country of origin | in |
Specifications
| Paruzzi number | 1245 |
|---|---|
| Original VW number | 211609619 |
| Brand | EMC |