Product description
When replacing the rear brake shoes, it is usually necessary to transfer the handbrake levers, which are fitted with a pin that is secured with a horseshoe-shaped clamp.
If the pin is damaged, badly rusted or lost, you'll need to replace it, and don't forget to order the horseshoe-shaped clamp, which can be found in the "options" tab.
The horseshoe-shaped pliers must always be replaced, as they are pinched around the pin's notch and are therefore intended for single use only.
Note: There are many reproductions whose dimensions do not match those of the original, so fitting the handbrake lever will not be easy and can sometimes only be carried out after modification. The parts listed here are 100% identical to the original and fit as they should, without modifications or other problems.
1029 items in stock
€4.90 (Per pair)
Prices incl. VAT
- Order before 3PM (CET)? Shipped the same day!
- Do you have questions? We are reachable until 17h (CET).
- VW specialist since 1989
- 30 days return period
Beetle (except for vehicles with self-adjusting brakes)
Karmann Ghia
Bus until 7.1979 (except for vehicles with self-adjusting brakes)
Type 3
Thing
Do you want to know where this part belongs? Consult the exploded view drawing.
View drawing| Manufacturer | Westerwind Nederland BV |
|---|---|
| Manufacturer address | Kreeft 18, 4401NZ Yerseke, Nederland |
| Manufacturer contact | info@european-motorcompany.com |
| Country of origin | in |
Specifications
| Paruzzi number | 1137 |
|---|---|
| Original VW number | 211609601B |
| Brand | EMC |