Product description

If you don't want the heat exchangers to expire on a higher horsepower engine where high power is achieved by an exhaust system with a larger tube diameter, use these high performance heat exchangers. The inner tube diameter is 35 mm (outer 38 mm). The connection between the exhaust system and the exchanger is a flanged connection, where gaskets for the larger diameter must be used (see the "Options" tab).

To mount the heat exchanger, it is necessary to weld the supplied connecting flanges to your existing exhaust system. As the heaters are designed to lose as little energy as possible, they are very light, which means that the aluminium part around the exhaust pipe is missing. The heat output is therefore lower than that of a standard exchanger. But it's better to have a little less heat while maintaining engine power, rather than without heating.

They are supplied in grey transport paint, excluding the control levers (see "options" tab), but with mounting flanges. The transport paint is intended to prevent rusting in the warehouse. If you want to keep the exchanger clean, you will have to treat it regularly with heat resistant paint. Immediately after switching on the heater, the transport paint will partially peel off.

The heaters are supplied without mounting material and without control levers, please order them immediately. See the "options" tab.

If you are looking for standard exchangers, chromed exchangers, exchangers for another type of engine or an exchanger replacement, look at the "related parts" tab.

High performance heat exchanger right

Out of stock

€183.94 (Each)

Prices incl. VAT

Notify me when the item is available.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

By selecting continue you confirm that you have read our Privacy Policy and accepted our General terms and conditions. *

Order before 3PM (CET)? Shipped the same day!
Any questions? We're reachable until 17h (CET).
VW specialist since 1989
30 days return period

Type-1 engine 1.1963 and later (except 30hp and AJ injection)

General safety warning

Specifications

Paruzzi number	1066
Brand	Classicline
Freight	No

Complete your order:

options

Copper exhaust gaskets for 38 mm tubing

Applicable on Type-1 engines | Type-3 engines | CT/CZ engines | Waterboxer engines
Paruzzi number: 1019

43 items available

€18.00

incl. vat

Paper exhaust gaskets from 35 mm tubing

Applicable on Type-1 engines | Type-3 engines | CT/CZ engines | Waterboxer engines
Paruzzi number: 1059

25 items available

€5.40

incl. vat

Heat exchanger lever including mounting kit left

Applicable on Beetle/Karmann Ghia 1.1963 and later (except USA injection) | Bus 1.1963 until 7.1967 | Thing civil
Paruzzi number: 1082
Original VW number: 043298147A 113255117 N124341 N120571 N102052 311129777 111255309B 111255311 113255249 111251261C 113255147C N0120571 042255147A 211255271

74 items available

€5.35

incl. vat

Heat exchanger lever including mounting kit right

Applicable on Beetle/Karmann Ghia 1.1963 and later (except USA injection) | Bus 1.1963 until 7.1967 | Thing civil
Paruzzi number: 1083
Original VW number: 043298148A 113255117 N124341 N120571 N102052 311129777 111255309B 111255311 113255250 111251261C 113255148C N0120571 042255148A 211255271

576 items available

€5.40

incl. vat

Heater cable mounting kit

Applicable on Beetle | Karmann Ghia | Bus with aircooled engine | Type 3 | Thing civil
Paruzzi number: 1086
Original VW number: 311129777 N124341 N102052 111255309B 111255311

613 items available

€1.75

incl. vat