Product description
If you have not adjusted the valve clearance for a long period of time, the adjustment bolts and/or lock nuts can be very tight and difficult to unlock. Sometimes, cutting and/or damaging the thread is the only solution. In this case, you will need to install new sets of screws and/or lock nuts.
It is also possible that the set screws may be worn at an angle or hammered due to the age of the engine. In this case, the valve clearance can no longer be adjusted correctly, replacing the nuts and adjustment bolts is the only solution.
Different types were used for the different engines. If in doubt, measure the old adjusting screw before ordering. The latter is necessary in CT/CZ engines, two sizes are used in these engines.
Attention! Our adjusting screws and locking nuts are of very high quality, many adjusting screws on the after-market are of very poor quality and will be broken after a few kilometers. It is an important part to keep the valves intact, so don't use cheap alternatives, it can cost you a lot of money.
Note: M8 x 1.0 locknuts have a dual function: they were also used as locknuts for the stabilizer bar bolts on Beetle, Karmann Ghia, VW Thing and Type 3 models fitted with swing axles.
Valve adjustment- and equalizer torsion bar (stabilizer) bolt lock nuts
281 items in stock
€8.25 (8 pieces)
Prices incl. VAT
- Order before 3PM (CET)? Shipped the same day!
- Do you have questions? We are reachable until 17h (CET).
- VW specialist since 1989
- 30 days return period
Valve adjustment screw:
Type-1 engines until 1983 (VIN 11-E-119 815)
Type-3 engines
Type-4 engines 1700cc
CT/CZ engines
Equalizer torsion bar bolt:
Beetle
Karmann Ghia
Type-3
Kübel
Do you want to know where this part belongs? Consult the exploded view drawing.
View drawing| Manufacturer | Westerwind Nederland BV |
|---|---|
| Manufacturer address | Kreeft 18, 4401NZ Yerseke, Nederland |
| Manufacturer contact | info@european-motorcompany.com |
| Country of origin | DE |
Specifications
| Paruzzi number | 1725 |
|---|---|
| Original VW number | N0111521 N111521 N0111525 |
| Brand | EMC |
| Thread size | M8 x 1.00 |
| Wrench size | 13 mm |
Share:
- Applicable on Type-1 engines until 1983 (VIN 11-E-119 815) | Type-3 engines | Type-4 engine 1700cc | CT/CZ engines
- Paruzzi number: 1782
- Original VW number: 111109451 043109451
906 items available
Prices incl. VAT
- Applicable on Type-1 engines 1200cc (except 25hp+30hp) | Type-1 engines 1300-1500-1600cc | Type-3 engines | CT/CZ engines | Waterboxer engines
- Paruzzi number: 1956
- Original VW number: 113101481F 113101483D
3371 items available
Prices incl. VAT
- Applicable on Type-4 engines
- Paruzzi number: 41773
- Original VW number: 021101481
581 items available
Prices incl. VAT
- Paruzzi number: 1120
249 items available
Prices incl. VAT
- Applicable on Type-1 engines until 1983 (VIN 11-E-119 815) | Type-3 engines | Type-4 engine: 1700cc | CT/CZ engine
- Paruzzi number: 4129
94 items available
Prices incl. VAT
- Applicable on Type-1 engines until 1983 (VIN 11-E-119 815) | Type-3 engines | Type-4 engine 1700cc | CT/CZ engines
- Paruzzi number: 1782
- Original VW number: 111109451 043109451
906 items available
Prices incl. VAT
- Applicable on Type-4 engines 1800cc and 2000cc
- Paruzzi number: 41725
- Original VW number: 028109453
9 items available
Prices incl. VAT
- Applicable on Type-4 engines 1800 and 2000cc
- Paruzzi number: 41782
- Original VW number: 022109451
41 items available
Prices incl. VAT
- Applicable on Type-1 engine 1983 (VIN 11-E-119 816) and later | CT/CZ engines | Waterboxer engines
- Paruzzi number: 71725
- Original VW number: N0111531
19 items available
Prices incl. VAT
- Applicable on Type-1 engine 1983 (VIN 11-E-119 816) and later | CT/CZ engines | Waterboxer engines
- Paruzzi number: 71782
- Original VW number: 025109451
34 items available
Prices incl. VAT