Product description
Would you like to tow a trailer or fit a bicycle carrier to your T25 while maintaining the original appearance of your Bus? Then this towbar, with its characteristic curved towbar neck, also known as a swan neck, is an excellent solution. The construction is based on the classic design used for the T25 at the time.
This towbar has a sturdy steel construction and is specially designed for the T25 with original steel bumpers. The towbar replaces the original bumper brackets, after which the existing bumper is mounted directly onto the designated mounting points of the towbar. This preserves the original appearance of your Bus as much as possible.
Installation
The towbar is mounted using the existing bumper bracket mounting points. This means that no additional holes need to be drilled in the rear body panel. All necessary mounting hardware is included.
Installation is also possible on T25 models with plastic bumpers, such as the Carat, California and various luxury and special editions. The plastic bumper must be modified to provide sufficient clearance for the towbar.
Electrical connection
The towbar is supplied with a mounting bracket for the trailer socket, but without the socket or electrical wiring kit. These must be ordered separately and can be found under the Options tab.
When you connect a trailer, the trailer's indicators must also be operated by your Bus's indicator relay. This increases the load on the relay and may cause the indicators to flash at an incorrect frequency.
According to European regulations, indicators must flash at least 60 and no more than 120 times per minute. If the indicators flash too slowly when a trailer is connected, it may be necessary to replace the original relay with a version suitable for six indicators.
You can also find this special indicator relay under the Options tab.
Other models
You can find the towbar for Syncro models under the Other models tab.
Towbar
1 items in stock
€412.04 (Per set)
Prices incl. VAT
- Order before 3PM (CET)? Shipped the same day!
- Do you have questions? We are reachable until 17h (CET).
- VW specialist since 1989
- 30 days return period
T25, except Syncro
Note: For models with steel bumpers. For models with plastic bumpers, see product description.
| Manufacturer | Dansk Anhaengertraek GDW A/S |
|---|---|
| Manufacturer address | Gejlhavegard 4. DK-6000 Kolding, Denmark |
| Manufacturer contact | +4575500390 |
| Country of origin | Denmark |
Specifications
| Paruzzi number | 6000-108 |
|---|---|
| Brand | GDW |
| Max pressure | 100 KG |
| Tensile load | max 2000 KG |
Share:
- Paruzzi number: 4024
Out of stock
Prices incl. VAT
- Applicable on 12V | 4 terminals | 6 x 21 Watt | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 70684
- Original VW number: 211953231G, 431953231
2 items available
Prices incl. VAT
- Applicable on Vanagon/T25
- Paruzzi number: 76178
13 items available
Prices incl. VAT
- Applicable on Vanagon/T25 (except Carat)
- Paruzzi number: 70005
- Original VW number: 251807111C
10 items available
Prices incl. VAT
- Applicable on Vanagon/T25 (except Carat)
- Paruzzi number: 70006
- Original VW number: 255807111B
3 items available
Prices incl. VAT
- Applicable on Vanagon/T25 (except Carat)
- Paruzzi number: 70010
- Original VW number: 251807311D
12 items available
Prices incl. VAT
- Applicable on Vanagon/T25 (except Carat)
- Paruzzi number: 70011
- Original VW number: 255807311H
3 items available
Prices incl. VAT
- Applicable on LT panel van 11.1975 until 8.1996 | Use: | Paruzzi #4025 | Paruzzi #4024 | Note: Fitment on Brazilian and Mexican buses is not guaranteed unless specifically stated.
- Paruzzi number: 590691
1 item available
Prices incl. VAT
- Applicable on Beetle: | VW1300, VW1500, 1302 and 1303 from 8.1967 and later | VW1200 from 8.1973 and later
- Paruzzi number: 6000-101
1 item available
Prices incl. VAT
- Applicable on T2 Bay up to 7.1971
- Paruzzi number: 6000-104
1 item available
Prices incl. VAT
- Applicable on T2 Bay from 8.1971 up to 7.1972
- Paruzzi number: 6000-105
1 item available
Prices incl. VAT
- Applicable on T2 Bay from 8.1972 and later
- Paruzzi number: 6000-106
1 item available
Prices incl. VAT
- Applicable on T25 Syncro | Note: For models with steel bumpers. For models with plastic bumpers, see product description.
- Paruzzi number: 6000-107
1 item available
Prices incl. VAT
- Applicable on Karmann Ghia
- Paruzzi number: 6000-109
1 item available
Prices incl. VAT
- Applicable on Type 3 from 8.1969* onwards | * With modification also suitable up to 7.1969, see product description.
- Paruzzi number: 6000-111
5 items available
Prices incl. VAT