Product description
Ignition points usually need replacing after around 10,000 km. Wear and burning alter the contact gap, causing the ignition to operate less accurately. Therefore, check the condition and adjustment of the ignition points every 5,000 km to be sure.
The ignition points can be accessed after removing the distributor cap, rotor and, if fitted, the protective cap.
After fitting new ignition points, the contact gap must be adjusted. This can first be done statically with a 0.40 mm feeler gauge, see the Related Parts tab. Then check the adjustment with the engine running using a dwell meter. The dwell angle should be between 44° and 50°.
Between approximately 1960 and 1968, Volkswagen used different brands of distributors. Bosch was the most common, but Garbe-Lahmeyer distributors were also fitted. As a result, different distributor types can be found on vehicles from this period, even within the same model year.
Therefore, always check which brand and type of distributor is actually fitted to the engine before ordering the ignition points.
84 items in stock
€6.56 (Each)
Prices incl. VAT
- Order before 3PM (CET)? Shipped the same day!
- Do you have questions? We are reachable until 17h (CET).
- VW specialist since 1989
- 30 days return period
Type 1 engines:
30 hp from 8.1960 and later
34 hp from 1964 (engine number 8 350 310) up to 7.1965
1200 cc from 8.1965 up to 7.1968
1300 cc up to 7.1968
1500 cc up to 7.1968
Type 3 engines:
1500 cc from 8.1963 up to 7.1965
1500 cc with engine code K up to 7.1968
1600 cc with engine code T up to 7.1968
Do you want to know where this part belongs? Consult the exploded view drawing.
View drawing| Manufacturer | Robert Bosch GmbH |
|---|---|
| Manufacturer address | Auf der Breit 4, 59552, Karlsruhe, Germany |
| Manufacturer contact | kontakt@bosch.de |
| Country of origin | Türkiye |
Specifications
| Paruzzi number | 2005-101 |
|---|---|
| Original VW number | 111998059 |
| Brand | Bosch |