Product description
If the engine must be removed, first remove the rear engine back plate from the to allow removal.
If this metal sheet is not present, the engine draws in the hot air produced by the exhaust system. We must limit this as much as possible. Be careful not to travel long distances without this cover plate, especially in summer, the risk of overheating is very high.
The rear engine cover plates of the Volkswagen, Karmann Ghia and Split Bus are available in different versions, with or without holes for heating and preheating pipes, optionally in black or chrome.
These panels are available for a limited number of years of construction. If you also replace the sheet behind the pulley, you can use the rear sheets for subsequent years of construction. Also keep in mind that the cover plates with holes for preheating pipes is not equipped with sealing parts for tubes, if you want them to be identical to the original, then transfer the sealing parts from your old cover plate.
The rear panels of the Bay Window Bus (VW T2) are identical to the original in every detail. If you also need the sheet metal part behind the pulley, you can use part number #02236. In this case, you will have to close the hole for the crankcase ventilation tube yourself.
Engine cover plate without heater and heat riser holes chrome
17 items in stock
€39.16 (Each)
Prices incl. VAT
- Order before 3PM (CET)? Shipped the same day!
- Any questions? We're reachable until 17h (CET).
- VW specialist since 1989
- 30 days return period
Type-1 engines for Beetle and Karmann Ghia all years, and Bus until 7.1967:
1300cc until 7.1969
1500cc until 7.1967
Note:
Also use panel # 2211 to fit on later 1300, 1500 or 1600cc engines
Specifications
| Paruzzi number | 2215 |
|---|---|
| Brand | Paruzzi |
| Freight | No |
Share:
Complete your order:
- Paruzzi number: 8000
887 items available
incl. vat
- Paruzzi number: 8001
558 items available
incl. vat
- Applicable on Type-1 engines for Beetle and Karmann Ghia all years, and Bus until 7.1967: | 1300cc until 7.1969 | 1500cc until 7.1967 | Note: | Also use panel # 2235 to fit on later 1300, 1500 or 1600cc engines
- Paruzzi number: 2225
61 items available
incl. vat
- Applicable on Type-1 engines
- Paruzzi number: 2200
4 items available
incl. vat
- Applicable on Type-1 engines: | 1300cc, 1500cc and 1600cc until 7.1970 | 1200cc all years | Note: | The listed engines and model years are based on the oil cooler mounted in the fan shroud but can also be used for later engines and model years, provided an external oil cooler is installed
- Paruzzi number: 2202
8 items available
incl. vat
- Applicable on Type-1 engines: | 1300cc, 1500cc and 1600cc until 7.1970 | 1200cc all years | Note: | The listed engines and model years are based on the oil cooler mounted in the fan shroud but can also be used for later engines and model years, provided an external oil cooler is installed
- Paruzzi number: 2204
7 items available
incl. vat
- Applicable on Type-1 engines 1300, 1500 and 1600cc until 7.1970
- Paruzzi number: 2208
- Original VW number: 211119303B 113119304G
14 items available
incl. vat
- Applicable on Type-1 engines: | 1200cc until 7.1969 | 1300cc until 7.1969 | 1500cc until 7.1967 | Note: | Also use rear panel # 2213, # 2214, # 2215 or # 2221 to fit on later 1300, 1500 or 1600cc engines with a single hotspot
- Paruzzi number: 2211
- Original VW number: 113119533G
7 items available
incl. vat
- Applicable on Type-1 engines for Beetle and Thing: | 30hp 8.1960 and later | 1200cc all years | 1300cc until 7.1970 | 1500cc until 7.1970 | 1600cc until 7.1970 | Type-1 engines for Bus: | 30hp 6.1959 and later | 1200cc all years
- Paruzzi number: 2212
- Original VW number: 113119517R
14 items available
incl. vat
- Applicable on Type-1 engines 1300, 1500 and 1600cc
- Paruzzi number: 2216
- Original VW number: 113119350 043119350B 113119352C 043119352 211119351C 043119351B
33 items available
incl. vat
