This adapter replaces the original oil cooler and has an inlet and outlet to allow the installation of an external oil cooler.
If the original fan shroud is used, space must be provided to run the oil lines to the adapter. Most of the fan shrouds in our shop already take this into account.
The adapter is made of aluminium. When tightening the oil hose connections and mounting the adapter on the housing, be careful not to overtighten, otherwise the aluminium may tear.
Look out! Use only the flat gasket supplied and not the original sealing rings, although the shape of the original sealing rings is present, sooner or later this will lead to leaks.
The upper connection is the outlet and the lower connection is the inlet, seen from the engine and not the oil cooler.
Useful information from Paruzzi magazine and from our YouTube channel :
Look for more technical articles on the page Paruzzi Magazine