These plastic clips have been used for a variety of applications on different Volkswagen models. For mounting emblems, securing covers to replace semaphores, and tightening the rosette around the air control.
When disassembled, these plastic sleeves generally do not survive, so it is advisable to replace them. Below you'll find more detailed information by VW model and the number of parts you'll need if you need to replace them all for this application.
Beetle
- for "VW" trunk emblem from 1.1961 and later, 3 parts required
- fitting the "Karmann" emblem on the right-hand side in the convertible version, 2 parts required
- fitting a cover to replace the sémaphore, 4 parts needed for both sides
Karmann Ghia
-assembling the "Karmann" emblem on the right-hand side, 2 parts needed
Split Bus
-assembling a cover to replace the semaphore, 4 parts required for both sides
Type 3
-mounting the "VW" emblem on the front trunk, 3 parts required
-mounting the "VW Variant" emblem on the tailgate, 3 parts required
-assembly of the rosette around the ventilation lever on the dashboard, 4 parts required
VW Thing
-assembly of the "VW" emblem on the front trunk, 3 parts required
Useful information from Paruzzi magazine and from our YouTube channel :
Look for more technical articles on the page Paruzzi Magazine