This universal high-flow inlet manifold has two connections for a 1200, 1300, 1500 and 1600cc carburetor (30PICT, 31PICT and 34PICT) and is also equipped with a vacuum connection, which can be closed with the supplied plug.
This intake manifold has an additional advantage over the original; thanks to the more fluid shape of the intake pipes, the flow of the fuel-air mixture is better than the original and therefore releases more power.
Supplied with gaskets for the manifold pre-heating and for both carburetor sizes 30PICT/31PICT and 34PICT (30PICT and 31PICT have the same mounting dimensions).
Remarks :
The intake pipes are elongated so that with a long stroke engine, this manifold is also usable, when used with an engine with original stroke, the pipes must be cut to size.
Depending on the type of exhaust, the preheating pipes must be slightly curved for a good fit.
When mounting a 30PICT or 31PICT carburetor, the rear nut is against the intake manifold, prefer the M8 nut with a 12mm wrench width and/or remove some aluminum on the rear.
Useful information from Paruzzi magazine and from our YouTube channel :
Look for more technical articles on the page Paruzzi Magazine