Page 13 - paruzzi-magazine-en-22

replacing the sump plate studs

2

The trick is to tighten both nuts 3

very well, otherwise the tech-
nique won't work.

Then loosen the inner nut (pic-
ture 3), the stud should come

loose. If it doesn't move, use an

electric paint stripper to heat
up the stud. Sometimes it is not

clear if the stud is rotating, a

small lick of paint on the stud
can help to see if it is moving.

Repeat this technique for the

other four short studs.

Paruzzi Magazine 22 13

CLASSIC CAR PARTS