Do you have the product from the page mounted on your car? Take a clear picture or video of it and put it in the spotlights. This way your car gets admired by a lot of people and others can see what the product looks like. We reward your effort with a € 1,- discount code for every approved photo or video. Use the discount on your next order. Click here to upload your photo Click here to upload your video
Fits: Type-1 engines 1300 and 1600cc 8.1971 and later
Specifications:
Gears size: 30 mm
Note:
stock replacement Beetle 10/92»
not applicable to Bus
These parts are usually ordered with the part that is selected. They are not included in the delivery, but are often replaced together.
Oil pump gaskets (set)
Type-1:
1200cc 1967 (D 0230001) and later
1300cc 1967 (E 0013651 and F 1225018) and later
1500cc 1967 (L 0018100 and H 0822052) and later
1600cc
Type-3:
1500cc 1967 (K 0090196) and later
1600cc 1967 (T 0445098) and later
CT/CZ
Type-4 (only one gasket can be used)
Waterboxer engines Paruzzi number : 1998 Original VW number : 111115131B, 111115111B
These parts are supplied or included with the part you have selected now, you can use these parts to repair the selected part.
Stock oil filter
stock replacement:
Type-1 engines 10.1992 and later
other applications:
replacement for oilpump #1806 and #1807
to be used for adapter #1825 and #3827 Paruzzi number : 1826 Original VW number : 056115561G
The parts mentioned here have a close relationship with the selected part and are often ordered along with the selected part or searched for.
Tip: if you do not get a good search result when entering a keyword try a part that has something to do with it, if there is a related tab, the searched item is often mentioned there.
Engine oil 20W50 mineral (1 liter)
aircooled engines with mechanical lifters Paruzzi number : 50700
If the selected part does not apply to your Volkswagen type, check this list of the same parts that fit on other construction years or other types of cars.
Full flow oil pump with filter
Type-1 engines:
1300, 1500 and 1600cc 8.1969 until 7.1971
1200cc 8.1969 and later
Useful information from Paruzzi magazine and from our YouTube channel :
Engine overhaul - video 06 find the TDC compression stroke We will explain in this video how to determine the top dead center, as well as which of the two top dead center moments is this one from the compression stroke. This is important in order to properly position the distributor drive shaft. Properly understanding how a four-stroke engine works is essential when you begin an engine overhaul.
Engine Overhaul - video 01 video series preview In this video, we will give an overview of the most important steps during the engine overhaul of a type 1 air-cooled Volkswagen engine. Each step will be discussed in a separate video. We will show special tools and even homemade tools to help the enthusiast perform their engine overhaul.
oil seals All rotating parts fitted with bearings lubricated by oil or grease, such as crankshafts, transmission shafts, drive shafts, steering rods, etc., must be sealed. In our classic VW's we find two types of oil seals, namely the static and the dynamic (lip seal) oil seals.
Engine overhaul - video 03 the workshop We show in this video what the possibilities are to work on your VW engine. If you plan to overhaul several engines, then buying a professional engine stand is recommended. If you only want to overhaul the engine of your own classic Volkswagen, then buying special tools is not cost effective. We will show all options.
Engine diagnostics - video 01 crankshaft end play In the first video of this new series, we will look at how to measure the crankshaft end play. Measuring the crankshaft end play, will help you estimate if your engine needs a total overhaul. If the result of the measurement is greater than or equal to 0.15 millimeters, then the crankshaft clearance is too large, and a total engine overhaul is recommended.
Engine diagnostics - video 04 part 2 valves and valve springs In the second and third parts of this video, we will measure valve spring pressure. We begin in part 2 by measuring the valve spring pressure at open valve. Also known as the valve spring pressure at maximum valve lift. In part 3, we will measure the valve spring pressure at installed length.
Engine adjustment - video 02 adjusting the rocker arms In the first video of this series, we adjusted the valve clearance. In addition to the valve clearance, the position of the rocker arm relative to the valve stem, is also a very important setting. If a rocker arm is not positioned correctly, it can be adjusted, which is called shimming.
Engine overhaul - video 16 part 1 valves removal In this first part of video 16, we disassemble cylinder head valves and valve springs. In the first part, we start by demonstrating the tools and techniques used, and disassemble the valves of a relatively new cylinder head.
Engine overhaul - video 05 install the distributor drive shaft This is the continuation of video 04, we are now going to install the distributor drive shaft, both on an already rebuilt Volkswagen Type 1 engine and on a split Type 1 crankcase. We pay a lot of attention to the correct positioning of the drive shaft at the beginning of this video series, because it is crucial to be able to adjust the ignition properly, later, when the engine is overhauled.