Useful information from Paruzzi magazine and from our YouTube channel :
testing the coil You can easily check if the electrical voltage in the primary circuit of the coil is correct by using a multimeter. High voltage measurement at the secondary circuit cannot be performed with a standard multimeter.
measuring the coil Everyone knows that the capacitor will protect the contact points from burn-in. But what few people know is that the capacitor also plays a very important role in transforming the low voltage of the battery (6V or 12V) into a high voltage (more than 10,000V) needed to create a spark between the electrodes of the spark plug.
vacuum advance Both the vacuum advance and the mechanical advance were used for the VW Beetle, Karmann Ghia, VW Bus, VW Thing, type 3 and type 4. You can't stick a year of manufacture or type of engine on it, both systems do the same thing in the end, they bring forward the ignition time depending on the engine speed.
the condenser explained The condenser is the most misunderstood part of the motor. What is inside that metal cylindrical part? So, what does this part actually do? Is it really necessary for the proper functioning of the engine? In this article we will limit ourselves to explaining what a capacitor is and what it does, and to measuring and testing the condenser.
spark plug heat range The construction of the part of the spark plug that is screwed into the cylinder head determines the degree of heat. The spark plugs are screwed into the cylinder head, which is the warmest spot of the engine. Temperatures can be as high as 1000°C. The electrode part of the spark plug extends into the combustion chamber of the cylinder head.
ignition timing - static In air-cooled Volkswagens from August 1970, the notch in the crankshaft pulley is used to dynamically adjust the ignition timing. The static adjustment with the test lamp is then only suitable for temporary adjustment on younger models.
Engine overhaul - video 12 the flywheel In this video, we'll explain how to disassemble and assemble the flywheel, and what tools you'll need to do so. To disassemble the flywheel, you will need to unscrew the gland nut. This nut is attached with a torque of 350 Nm, it will require some force to loosen.
(dis)assembly of the spark plugs It seems like a simple job, replacing or checking the spark plugs of your VW. Yet we see that it is not always done according to the rules. Spark plugs that are not properly assembled or have been disassembled carelessly can cause a lot of problems with the engine.
6 volts and 12 volts Until the early 1970s, the VW Beetles were equipped with 6 volts in their 1200 cc version. The 1300 cc Beetle was first equipped with a 12 volt system in 1968. The VW Bus and type 3 VWs were increased to 12 volts in 1967. Types 4 are in 12 volts, as they were only introduced to the market in the late 1960s.
ignition timing - dynamic In this edition, we will adjust the ignition with the engine running, this is called a dynamic measurement. VW advises in its workshop manuals this way of adjusting all air-cooled VWs from August 1970 onwards. The static adjustment with a test bulb is then only suitable for a temporary engine adjustment on these young Volkswagens.