If you wish to fit an external oil filter without having to modify your crankcase, this pump is the best solution. Can also be used as an additional oil cooler or to heat the LPG evaporator.
On the oil pump cover there is an inlet and an outlet that transports the oil from the pump to an external oil filter, oil cooler or evaporator (LPG) and then to the oil pump, from where the oil is pumped back into the engine as in the original model.
The efficiency of the oil pump is much higher than the original model due to the 32 mm long gears.
It is made of aluminium so that it expands evenly with the crankcase.
It is advisable to order an oil pressure increase kit directly (see options tab), because due to the higher pressure, the existing oil pressure regulation will no longer work correctly.
Oil pumps are supplied with gaskets and mounting bolts but without 1/4 NPT hose connections (see Options tab).
Caution : Not suitable for versions with automatic gearbox!
Useful information from Paruzzi magazine and from our YouTube channel :
Look for more technical articles on the page Paruzzi Magazine