These parker screws or self-tapping screws are used in the various Volkswagen models for various applications. With a few exceptions, they all have one thing in common: a plastic cap is used to keep the screw head out of sight.
These plastic covers are available in different colors and correspond to the color of the part to be assembled (see the Related Parts tab).
If you wish to use these parker screws for purposes other than those indicated below, please note the dimensions of 13 mm long and 4.2 mm thick.
Note : This is not a universally available parker screw, but a screw specially developed by Volkswagen. Recognizable by the part number that does not begin with the 'N' of normteile (standard part)
Beetle
crank handle locking plate for the sunroof (1x)
Bay Window Bus (T2 )
1969 upper dashboard, chassis number 219 204 330 (8x)
flag bearer for military models (4x)
tailgate and bulkhead cover panel (10x)
belt / laundry hook in the cabin (count and check size)
crank handle locking plate for the sunroof (1x)
VW Vanagon
flag bearer for military models (4x)
table against guide frame for Carat version (19x)
partition wall (25x)
sliding door covering panel (1x)
rear wall cladding panel (10x)
crank handle locking plate for the sunroof (1x)
traction cable guide for sliding roof (2x)
Type 3
door panels (4x)
crank handle locking plate for the sunroof (1x)
The number in brackets is the number of self-tapping screws required for the mentioned application
Useful information from Paruzzi magazine and from our YouTube channel :
Look for more technical articles on the page Paruzzi Magazine