As power increases, the clutch must also endure more. It is not enough to place a reinforced pressure group, it is also necessary to ensure that the mounting bolts can withstand the power.
You don't want the pressure group to spontaneously jump in a sprint. Therefore, for each engine that will generate higher power, it is mandatory to replace the original bolts with bolts having a higher tensile strength.
Also with a standard motor and a standard pressure unit, we advise you to always replace the bolts, these reinforced bolts give you extra security and leave nothing to chance.
Note: Tighten the bolts crosswise with a torque of 25 Nm on a standard pressure unit and 36 Nm on a reinforced unit.
Useful information from Paruzzi magazine and from our YouTube channel :
Look for more technical articles on the page Paruzzi Magazine