This B-quality gasket kit includes all gaskets for your transmission, including the primary shaft gasket, four swing axle adjustment gaskets (0.20 mm) and rear shaft gaskets. For swing axle gearboxes, you only need the seals of the bearing cover and the sleeve and retaining ring of the control rod that are not included in the kit.
For IRS gearboxes, you still lack the seals of the drive shaft and, just like for the swing axle shaft, the bearing sleeve of the control rod and the retaining ring.
The additional parts required are listed under the options tab, you will see that all options for swing axle gearboxes and IRS are listed here.
The swing axle adjustment joints (which only apply to swing axle gearboxes) are 0.20 mm thick. You may not have enough thickness or you may not be comfortable with the thickness, in which case they are also available separately with a thickness of 0.10 mm, they are also listed under the options tab.
If you want a higher quality set, which is not only more extensive, but whose joints are made of a higher quality paper, then take the quality A indicated under the alternatives tab.
Note: Because this set is suitable for several years there will be gaskets and / or seals that you do not use.
Useful information from Paruzzi magazine and from our YouTube channel :
Look for more technical articles on the page Paruzzi Magazine