To mount the cooling fan on the alternator (or dynamo), you will need an accessory that slides onto the alternator, on which the fan fits. The adjusting rings are mounted between the fan and the accessory. Install as many bushings as necessary until there is a gap of 1.8 mm between the dynamo plate and the fan. The fan is secured with the spring washer successively by the mounting nut (36 mm) at a tightening torque of 60 Nm.
This mounting kit includes the mounting bracket, mounting nut with spring washer (an additional spring washer is supplied as a spare).
Adjusting rings and keys of the dynamo are not included, take them in addition if necessary (see options tab).
Useful information from Paruzzi magazine and from our YouTube channel :
Look for more technical articles on the page Paruzzi Magazine