Del med en ny sjanse : Spindelklemmemutter til høyre
Oppmerksomhet: Alle norske bestillinger vil bli sendt av Winston VW Veteran AS (Sandnes, Norge),
så fraktkostnader er nå mye lavere og alle lokale avgifter er nå inkludert i prisen. På store karosserideler må det beregnes leveringstid, og høyere Innenlandsfrakt.
Hva er en ny sjanse? En reservedel er en del som har blitt returnert av en kunde og ikke lenger kan selges som ny, eller som har blitt skadet under transport. Skade eller ufullstendighet er de vanligste feilene. Feilen er beskrevet ovenfor, og bildet er en nøyaktig gjengivelse av den aktuelle delen. Klikk på det originale Paruzzi-nummeret for mer informasjon om delen og bilder av originaldelen.
Second chance-deler kan ikke returneres og har ingen form for garanti, men du får en hyggelig rabatt på nyprisen.
Ordinær pris: NOK 211,77
på lager: 1 Bestille før 14:00 CET mandag til fredag og vi sender samme dag. Senere enn normalt på grunn av helligdag Vil bli sendt via UPS
Useful information from Paruzzi magazine and from our YouTube channel :
axle play with dial gauge The wheel play of the front wheel axles must be accurately adjusted. It can be done by feeling, but what if you don't have that experience. If you don't trust your gut feeling, or you are more of the type that wants to measure everything accurately, then adjusting the wheel play with a dial gauge is something you will appreciate.
the VW suspension Ferdinand Porsche came up with an ingenious concept at the beginning of the last century. A car that was built on the basis of a steel chassis plate with an independent and self-supporting body. Most of the cars from that period were built around a tubular chassis, so the Volkswagen Beetle (then still a Kdf-car) was revolutionary.
independent suspension Fixed one-piece front axles with leaf springs or torsion springs as on the VW Beetle, were widely used until the end of the sixties. Due to the demand for more comfort, better steering and by driving longer distances, the independent front suspension became more and more popular on luxury cars.
removing the MacPherson Sometimes it will be necessary to disassemble the MacPherson. It is located at the front on younger Volkswagen models such as the VW Beetles 1302 and 1303 and the VW Vanagon and at the front and rear on the VW Golf and VW 411/412. We will show how it works on a VW 1303, repair the bearings and install.
bearings replacement When you like to repair and replace everything on your classic Volkswagen yourself, there will come a time when you will have to replace damaged bearings? Bearings are used in the steering unit, suspension, wheel axles, dynamo or alternator, among other things.
measuring rear wheel geometry In the previous edition of this series, we measured the wheel geometry of the front axle. In this edition, we will measure the wheel geometry of the rear axle. The adjustment of both front and rear axles will follow in the next edition.
Caster and Toe In the previous edition, we explained what Camber and King Pin Inclination (KPI) are. An important consequence of KPI is the Scrub Radius, which is the friction radius of the front wheels. In addition to Camber and KPI, there are other important parameters, such as Caster angle and Toe.
wheel play adjustment The front and rear axles of your VW are mechanical parts that have to withstand a lot of forces. They are designed to withstand the full weight of the car, but they are also designed to absorb the forces that occur during acceleration and braking, which are several times greater than the weight of the car.
camber and King Pin The most visually striking of all wheel geometry settings, is wheel camber. We also discuss the King Pin Inclination and the Scrub radius in this article.
front wheel bearing replacement If the wheel bearings are worn or damaged, there is no point in adjusting the wheel play. You will first have to replace the wheel bearings to get a good result. In edition 18 we tuned the wheel play of the front wheels to the feel, in edition 19 we fine-tuned the wheel play by using a measuring clock. In edition 21, we are replacing the front wheel bearings.